Chapter 5 LAN Setup
The following lists out the steps taken, when a computer tries to access the Internet for the first time through the ZyXEL Device.
1When a computer (which is in a different subnet) first attempts to access the Internet, it sends packets to its default gateway (which is not the ZyXEL Device) by looking at the MAC address in its ARP table.
2When the computer cannot locate the default gateway, an ARP request is broadcast on the LAN.
3The ZyXEL Device receives the ARP request and replies to the computer with its own MAC address.
4The computer updates the MAC address for the default gateway to the ARP table. Once the ARP table is updated, the computer is able to access the Internet through the ZyXEL Device.
5When the ZyXEL Device receives packets from the computer, it creates an entry in the IP routing table so it can properly forward packets intended for the computer.
After all the routing information is updated, the computer can access the ZyXEL Device and the Internet as if it is in the same subnet as the ZyXEL Device.
5.5 Configuring the LAN
Click LAN to open the following screen.
Figure 17 LAN Setup
| 57 |
|
|