Chapter 3 Wizard Setup
Figure 12 Internet Access Wizard Setup: LAN Configuration
The following table describes the labels in this screen.
Table 9 Internet Access Wizard Setup: LAN Configuration
LABEL | DESCRIPTION |
LAN IP Address | Enter the IP address of your ZyXEL Device in dotted decimal notation, for |
| example, 192.168.1.1 (factory default). |
| Note: If you changed the ZyXEL Device's LAN IP address, you |
| must use the new IP address if you want to access |
| the web configurator again. |
LAN Subnet Mask | Enter a subnet mask in dotted decimal notation. |
|
|
DHCP |
|
|
|
DHCP Server | From the DHCP Server |
| Device to assign IP addresses, an IP default gateway and DNS servers to |
| computer systems that support the DHCP client. Select Off to disable DHCP |
| server. |
| When DHCP server is used, set the following items: |
|
|
Client IP Pool Starting | This field specifies the first of the contiguous addresses in the IP address |
Address | pool. |
|
|
Size of Client IP Pool | This field specifies the size or count of the IP address pool. |
|
|
Primary DNS Server | Enter the IP addresses of the DNS servers. The DNS servers are passed to |
| the DHCP clients along with the IP address and the subnet mask. |
|
|
Secondary DNS | As above. |
Server |
|
|
|
Back | Click Back to go back to the previous screen. |
|
|
Finish | Click Finish to save the settings and proceed to the next wizard screen. |
The ZyXEL Device automatically tests the connection to the computer(s) connected to the LAN ports. To test the connection from the ZyXEL Device to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the Site Map screen.
46 |
| |
| ||
|
|
|