ENGLISH
WLAN Setup with WPS
You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless network and add wireless devices to your wireless network at the touch of a button. The other wireless devices must also support WPS. Look for the WPS/WLAN button on the rear panel of your device.
1.Place a WPS-enabled device within range of the P-870HN-51b.
2.Press the WPS/WLAN button on the P-870HN-51b for five seconds. Press the WPS button on another WPS-enabled device. It doesn’t matter which button is pressed first. You must press the second button within two minutes of pressing the first one.
Your P-870HN-51b allows the PBC (Push Button Configuration) method, as well as the PIN (Personal Identification Number) configuration via the web configurator. See your User’s Guide for more information. Other WPS-enabled devices should provide at least one similar method.
3.The WLAN/WPS LED on the P-870HN-51b blinks for a few seconds, then shines steadily, indicating your devices are connected.
4.To add another WPS-enabled device to your wireless network, press the WPS buttons on your P-870HN-51b and your next WPS-enabled device.
Congratulations! You are now ready to connect to the Internet wirelessly through your P-870HN-51b.