ENGLISH

If you cannot access the Internet and the INTERNET LED is off, make sure you enter the correct information in the WAN screens.

If you are using a new Internet account, contact your ISP to make sure it is active.

If you are trying to access the Internet wirelessly, make sure the wireless and security settings in your wireless client are the same as the settings in the P-870HN-51b.

Wireless Setup

To create a wireless network, the P-870HN-51b and your wireless computer(s) must all use the same SSID (network name), channel and security settings.

1.Go to Network > Wireless LAN.

2.Enable wireless LAN, enter a name to identify your wireless network (such as “ZyXEL“) in the SSID field, and select a channel which is not used by neighboring wireless devices.

3.Select your security mode and configure wireless security settings. In this example, the P-870HN-51b uses WPA2-PSK for data encryption.

If you do not set wireless security, anyone within range could use your P- 870HN-51b to access your network and the Internet.

9