Chapter 5 LEDs and Troubleshooting
PLA-4xx Series User’s Guide 47
Inspect the LEDs on your PLA-4xx and make sure that the ETHN and LINK LEDs are on
or blinking. See Section 5.2 on page 45 for troubleshooting LED related problems.

5.4 Powerline Problems

VThe signal on my powerline network is weak.
1Your powerline adapters may be connected to electrical surge protectors. Connect them
to standard power outlets.
2Your powerline adapters may be located close to large appliances such as refrigerators or
air-conditioners that cause interference with the powerline signal. Move the adapters
further away from such appliances to reduce interference.
3Your powerline adapters may be placed close to electrical devices such as electrical
insect-killers which produce radio waves. These may interfere with the powerline
signals. Move the adapters further away from such electrical devices.
4Your wiring may be old and/or low quality or with a long wiring path.