ZyXEL Communications PLA-402 3.6 About Screen

		Chapter 3 Managing Your PLA-400/402
	Table 4 Network Info Screen (continued)
	LABEL	DESCRIPTION
	MAC Address	This field displays the MAC address of your power line adapter. The MAC address of
		your power line adapter can be found by looking at the label on your device. It
		consists of six pairs of hexadecimal characters (hexadecimal characters are “0-9” and
		“a-f”). In the case of the PLA-400/402, this label is on the bottom of the device.

	Transmit Rate	This field displays how fast information is sent from the power line adapter selected in
		the Configuration screen to this power line adapter. The rate is given in the following
		format: “application data transmission rate / raw data transmission rate”. Application
		data reflects more accurately how fast devices are transmitting application relevant
		traffic (for example Internet Protocol (IP) traffic). Raw data refers to the whole payload
		of the packets transmitted across the power line network.

	Receive Rate	This field displays how fast information is received from the power line adapter
		selected in the Configuration screen to this power line adapter. The rate is given in
		the following format: “application data transmission rate / raw data transmission rate”.
		Application data reflects more accurately how fast devices are transmitting application
		relevant traffic (for example Internet Protocol (IP) traffic). Raw data refers to the whole
		payload of the packets transmitted across the power line network.

Use the About screen to view information regarding the configuration utility and firmware

version of the PLA-400/402 you are connected to. Click the icon in the top right corner of the utility to view the About screen.

Figure 17 About Screen

The following table describes the labels in this screen.

Table 5 About Screen

LABEL	DESCRIPTION
Utility version:	This field displays the software version of the configuration utility.

Firmware	This field displays the firmware version of the device you selected in the Device
version	Selection field of the Configuration screen.
Released	This field displays the date when the firmware was released.

Close	Click the	button in upper right cornet to close the About window.