ZyXEL Communications PoE-10 About Your PoE-10, Key Features, Front Panel LEDs, Rear Panel and Connections, Packaging List, Description of LEDs

PoE-10 Single-port Power over Ethernet Injector

About Your PoE-10

The PoE-10 Single-port Power over Ethernet injector is a one-port power injector, designed for use with 10/100 BaseT Ethernet networks. The PoE-10 injects DC power through the unused twisted-wires (pairs 4/5 and 7/8) of a standard 8-pin CAT 5 cable. This allows increased flexibility in the locating of a power over Ethernet (PoE) enabled device by eliminating the need for a nearby power source.

Packaging List

The following items come with your PoE-10.

This User’s Guide

One Power Adaptor

One straight-through Ethernet cable

Key Features

One RJ-45, 10/100 Mbps PoE-enabled port.

Ensures a constant power supply to a PoE-enabled device. Automatically detects if the connected device is PoE-enabled to avoid sending power to a non-PoE device.

Front Panel LEDs

The LEDs on the front panel of the PoE-10 are shown next.

Description of LEDs

LED	COLOR	STATUS	MEANING
PWR	Green	On	Power is being supplied to the PoE-10.
		Off	No power is being supplied to the PoE-10.
LNK	Green	On	The PWR&DATA port is connected and sending
			power to an Ethernet device.
		Off	No Ethernet connection is present.
		Flashing	The connected Ethernet device is not
			PoE-enabled or is malfunctioning.

Rear Panel and Connections

The rear panel and connections of the PoE-10 are shown next. All connections

6