ZyXEL Communications PoE-10 LAN 10/100M Ports, POWER Socket, DATA, DATA, POWER, PWR&DATA, PWR&DATA, The maximum Ethernet cable length is 100m

PoE-10 Single-port Power over Ethernet Injector

are located on the rear panel.

LAN 10/100M Ports

The PoE-10 has two LAN ports. The PWR&DATA port delivers power to your PoE-enabled device. Use a straight-through Ethernet cable to connect the PWR&DATA port to your PoE-enabled device.

The DATA port does not deliver power. Use an Ethernet cable to connect the PoE-10’s DATA port to the LAN.

The maximum Ethernet cable length is 100m.

POWER Socket

WARNING: Use only the included power adaptor. It is suitable for desktop use. Use of another power adaptor may damage the PoE-10.

Connect the female end of the power adaptor to the PoE-10’s POWER socket. Connect the female end of the power cord to the power adaptor and the male end to a power source (wall outlet or power strip).

7