ZyXEL Communications PLA-4xx, Powerline Ethernet Adapter Series 5.7 About Screen

Chapter 5 The Configuration Utility

The following table describes the labels in this screen.

Table 7 Advanced Screen

LABEL	DESCRIPTION
Adapter	This field identifies which powerline network information is displayed. Different
	powerline networks are identified by the Ethernet interface (network card) on your
	computer which is connected directly to a powerline adapter. Typically there is only
	one connection. However, if your computer has two network cards and both are
	connected to a powerline adapter, then you have two powerline networks.

Site	This field displays:
	• Local, if it is the PLA-4xx directly connected to the computer running the
	configuration utility.
	• Remote, if it is a powerline adapter in your powerline network but not directly
	connected to the computer running the configuration utility.

MAC Address	This is a read-only field which shows the MAC address of the powerline adapter you
	are configuring. You can find the MAC address of your PLA-4xx displayed on a sticker
	on the bottom of your device.

Priority	Select a priority setting from the drop-down box for traffic FROM your selected device.
	The options, in order of importance, are High, Medium, Normal and Low.

Save	Click this to apply your changes. The new Priority setting is applied to the selected
	powerline adapter.

5.7 About Screen

Use the About screen to view information regarding the configuration utility and firmware

version of the PLA-4xx you are connected to. Click the icon in the top right corner of the utility to view the About screen.

Figure 29 About Screen

Upgrade to latest version firmware and utility.

The following table describes the labels in this screen.

Table 8 About Screen

LABEL	DESCRIPTION
Utility version:	This field displays the software version of the configuration utility.

Firmware	This field displays the firmware version of the device you selected in the Device
version	Selection field of the Configuration screen.
	In the example firmware version given in the screen, 3-0-3052, the firmware version
	is shown by the numbers 305, meaning this is firmware version 3.0.5.
	If your device’s firmware is earlier than 3.0.5, please use the Firmware Upgrade
	Tool to upgrade your firmware.

Released	This field displays the date when the firmware was released.

Close	Click the	button in upper right corner to close the About window.