ZyXEL Communications ZyAIR 100 Problems With the Utility Configuration, Problems With Access Point Settings, Back, Table 5-2Troubleshooting the Configuration

ZyAIR 100 Wireless PC Card

Problems With the Utility Configuration

Table 5-2 Troubleshooting the Configuration

PROBLEM	CORRECTIVE ACTION
Problems encountered with	Click Loopback in the Loop Back window to check the link status with
the configuration.	the Access Point it is associated with (Infrastructure mode).
	Click on the Site Survey tab to check whether there is high interference
	around the environment.
	Ensure that you have set the correct IP address for the ZyAIR 100. Use
	the Ping command to ping the unit itself.
	Netbeui must be installed and relevant parameters properly set. Double-
	click Network Neighborhood on your Windows® desktop. You should
	see your computer name.

Problems With Access Point Settings

Table 5-3 Troubleshooting the Settings for the Access Point

PROBLEM	CORRECTIVE ACTION
Problems with Access Point	Make sure that the Access Point is on and that all the LEDs are working
settings.	properly.
	Click Ping in Loop Back window to ping any other host. If the host does
	not respond, your Access Point might not be connected to the network.
	Re-configure and reset the Access Point.
	Use the Web Manager or Telnet to the Access Point to make sure all
	Access Points are connected to the network.

Troubleshooting 5-2