Tally Genicom Matrix Printer manual Csi ... Sp C, Csi ... Sp B, Csi Sp B

Graphic Size Selection (GSS)								CSI ... SP C
Graphic Size Modification (GSM)								CSI ... SP B
Data Structure ASCII	CSI	n	SP	"C"			[B]	graphic size selection	➊
hex.	9B	n	20	43
dec.	155	n	32	67
ASCII	CSI	n1	;	n2	SP	"B"	[A]	graphic size modification	➋
hex.	9B	n1	3B	n2	20	42
dec.	155	n1	59	n2	32	66

Description	➊ n specifies the hight of the used font
	The units are either decipoints or defined by the SSU function (Select Size Unit,
	see page 8).
	The width is implicitly defined by the height.
	Example:
	CSI 120 SP C	set 12 point font (= 120 decipoints)

➋n1 specifies the height of the used fonts (default setting: 100)

n2 specifies its width (default setting: 100)

These parameters are given as a percent value of the size establishment by sequence ➊.

Example:

CSI SP B

CSI 50 ; 50 SP B CSI 200 ; 200 SP B CSI 100 ; 67 SP B

standard height and width

half sized characters (e.g. for indices or exponents) double sized characters (e.g. for headlines) compresses a 10 pitch font for 15 cpi

If the selected character size is not printable, the next available character size is used.

42Character Styling