Tally Genicom Matrix Printer manual P10 Horizontal Resolution

p10 - Horizontal Resolution

A value of 0 is 60 dots per inch, while a value of 1 is 1/120 dots per inch. The default depends on the style in force. EAN and UPC styles default to 1. All other styles default to 0.

Note: This parameter affects bar codes printed at 0o or 180o rotation only. If you select the higher resolution, then bar codes are darker and are printed at a somewhat slower speed.

p11 - Check Character Enable

N / A

p12 - Human Readable Font

N / A

p13 - Height in 1/24-inch Increments

Normally, bar code height is specified in 1/12-inch increments by p2. Only specify p13 if your job requires the associated higher resolution of bar code height. A non-zero value of p13 supplants the value of p2.

Caution: In some versions of the printer, a non-zero value of p13 supplants all subsequent values of p2 until you ISU that printer. To be on the safe side, if you do not plan to use p13, then set p13 to 0. NOTE: Bar code height is limited to 10 inches.

7265 Programmer’s Manual	41
Copyright © 2004 TallyGenicom	Chapter 3 ANSI Bar Codes