Tektronix 071-0855-05 SENSeANALysisPATHTRACeEXPEctedTYPE, SENSeANALysisPATHTRACeEXPEctedVALUe

Reference: Remote Commands ~ Command Description

:SENSe:ANALysis:PATH:TRACe:EXPEcted:TYPE

This command sets the data sequence length used by the receiver for path Trace Identifier Mismatch measurements. This parameter may also be set by the :SENSe:ANALysis:PATH:TRACe:EXPEcted command. The query form returns the current setting of this parameter.

Syntax: :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:TYPE? :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:TYPE <Enum>

Parameters	Description
L1B	Constant 8-bit data
L16B	A repeating sequence of 16 bytes, 0-filled with CRC
L16FREE	A repeating sequence of 16 bytes, arbitrary format
L64B	A repeating sequence of 64 bytes, space-filled with CR/LF
L64FREE	A repeating sequence of 64 bytes, arbitrary format

:SENSe:ANALysis:PATH:TRACe:EXPEcted:VALUe

This command sets the data byte values used by the receiver for path Trace Identifier Mismatch measurements. The data bytes are formatted as a standard IEEE-488 data block. These values may also be set by the :SENSe:ANALysis:PATH:TRACe:EXPEcted command. The query form returns the current values.

Syntax: :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:VALUe? :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:VALUe <Block>

:SENSe:ANALysis:PATH:TRACe:EXPEcted:VALUe:STRIng

This command sets the data byte values used by the receiver for path Trace Identifier Mismatch measurements. The byte values are formatted as an ASCII string. These values may also be set by the :SENSe:ANALysis:PATH:TRACe:EXPEcted command. The query form returns the current values.

Syntax: :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:VALUe:STRIng? :SENSe<slot>:ANALysis:PATH:TRACe:EXPEcted:VALUe:STRIng <String>

OTS9100 User Manual 3-25