Husqvarna CTH2036T manual Know Your Tractor

Page 11

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

 

SERVICE

ROS "ON"

 

REMINDER/

IGNITION

POSITION

HOURMETER

ATTACHMENT

SWITCH

 

 

CLUTCH SWITCH

 

 

 

 

LIFT LEVER

 

 

PLUNGER

CLUTCH/BRAKE

 

LIGHT SWITCH

PEDAL

 

 

 

 

ATTACHMENT

 

 

LIFT LEVER

THROTTLE

 

 

CONTROL

 

 

CHOKE

 

 

CONTROL

 

PARKING

 

 

BRAKE

HEIGHT

 

MOTION

 

CONTROL

ADJUSTMENT KNOB

 

 

LEVER

 

 

FREEWHEEL

CONTROL

03083

Fig. 13

Our tractors conform to the applicable safety standards of the American National Standards Institute.

ATTACHMENT CLUTCH SWITCH - Used to engage the mower blades, or other attachments mounted to your tractor.

ATTACHMENT LIFT LEVER - Used to raise and lower the mower deck or other attachments mounted to your tractor.

CHOKE CONTROL - Used when starting a cold engine.

CLUTCH/BRAKE PEDAL - Used for declutching and brak- ing the tractor and starting the engine.

FREEWHEEL CONTROL - Disengages transmission for pushing or slowly towing the tractor with the engine off.

HEIGHT ADJUSTMENT KNOB - Used to adjust the mower cutting height.

SERVICE REMINDER/HOURMETER - Indicates when service is required for the engine and mower.

IGNITION SWITCH - Used for starting and stopping the engine.

LIFT LEVER PLUNGER - Used to release attachment lift lever when changing its position.

LIGHT SWITCH - Turns the headlights on and off. MOTION CONTROL LEVER - Selects the speed and direction of tractor.

PARKING BRAKE - Locks clutch/brake pedal into the brake position.

THROTTLE CONTROL - Used to control engine speed.

REVERSE OPERATION SYSTEM (ROS) "ON" POSITON - Allows operation of mower deck or other powered attach- ment while in reverse.

11

Image 11
Contents CTH2036T II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceIII. Children Table of Contents Unassembled Parts Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonTo Install Bagger Components to Tractor See Figs To Assemble Bagger See Figs Bagger Adjustment See FigHorizontal Adjustment Check for Proper Position of ALL Belts Vertical AdjustmentCheck Tire Pressure Check Deck LevelnessOperation Know Your Tractor HOW to USE Your Tractor Reverse Operation System ROS To Adjust Gauge Wheels See FigUsing the Reverse Operation System See Fig To Operate Mower See FigADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP Mowing TipsPurge Transmission Bagging See Fig To Dump Bagger See FigTo Convert Mower See Fig Lubrication Chart MaintenanceCheck Operator Presence System TractorBlade Care See Fig Star Pattern Blade See FigEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Belt Removal To Level Mower HousingTo Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig Transaxle Motion Control Lever Neutral Adjustment See FigBelt Installation To Check BrakeFront Wheel TOE-IN/CAMBER To Adjust Motion Control Lever See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTransmission Engine OIL StorageOther Fuel SystemTroubleshooting Points Engine continues Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationService Notes Service Notes 532 42 66-43 04.01.09 CL