Husqvarna CTH2036T manual Table of Contents

Page 4

PRODUCT SPECIFICATIONS

Gasoline Capacity

2.5 Gallons (9,5 L)

and type:

Unleaded Regular

Oil Type (API-SG-SL):

SAE 10W30 (above 32°F/0°C)

 

SAE 5W-30 (below 32°F/0°C)

Oil Capacity:

w/ Filter:

64 oz. (1,9 L)

 

 

Spark Plug:

Champion RC12YC

 

(Gap: .030"/ 7,6 mm)

Ground Speed mph/kph:

Forward:

0 – 5.2/8,4

 

Reverse:

0 – 2.9/4,7

Charging System:

15 AMPS @ 3600 RPM

Battery:

AMP/HR:

28

 

MIN. CCA:

230

 

CASE SIZE:

U1R

Blade Bolt Torque:

27-35 FT. LBS.

 

 

 

CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this tractor.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tractor properly. Always observe the "SAFETY RULES".

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tractor.

•Follow the instructions under the "Maintenance" and "Storage" sections of this owner's manual.

WARNING: This tractor is equipped with an internal com- bustion engine and should not be used on or near any un- improved forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

6-9

OPERATION

10-16

MAINTENANCE SCHEDULE

17

MAINTENANCE

17-20

SERVICE AND ADJUSTMENTS

21-25

STORAGE

26

TROUBLESHOOTING

27-28

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CTH2036T Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Unassembled Parts Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidTo Install Bagger Components to Tractor See Figs Horizontal Adjustment Bagger Adjustment See FigTo Assemble Bagger See Figs Vertical Adjustment Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation System See FigTo Operate Mower See Fig Reverse Operation System ROSService REMINDER/HOUR Meter Before Starting the EngineCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsAutomatic Transmission Warm UP To Convert Mower See Fig To Dump Bagger See FigBagging See Fig Maintenance Lubrication ChartTractor Blade Care See FigStar Pattern Blade See Fig Check Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing To Replace Mower Blade Drive BeltSee Fig Belt RemovalTransaxle Motion Control Lever Neutral Adjustment See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigTo Adjust Motion Control Lever See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Storage OtherFuel System Engine OILTroubleshooting Points Engine continues Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXService Notes Service Notes 532 42 66-43 04.01.09 CL
Top Page Image Contents