Husqvarna CRT1350LS owner manual Service and Adjustments, Tiller, Tire Care

Page 14

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 20)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK LEVER

HANDLE

(LOW POSITION)

handles_17

Fig. 20

CLEVIS PIN

HAIRPIN CLIP

Fig. 21

TO REMOVE BELT GUARD (See Fig. 22)

•Remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove cap nut and washer, and hex bolt and washer from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from tiller.

•Replace belt guard by reversing above procedure.

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated, overinflation can cause an explosion.

•Maintain 20 pounds of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 21)

•Place blocks under transmission to keep tiller from tipping.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

BELT GUARD

CAP NUT AND

 

WASHER

 

HEX NUT

 

AND WASH-

 

ER

 

(LOCATED

 

BEHIND

 

TIRE)

HEX BOLT

 

AND WASHER

HAIRPIN CLIP AND CLEVIS PIN

Fig. 22

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CRT1350LS Training Safety RulesMaintenance and Storage PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller Check Engine OIL Level See Before Starting EngineTo Transport ADD GasolineCultivating Tine Shear PinsTilling Hints Lubrication Chart MaintenanceMaintenance Schedule General RecommendationsEngine AIR Filter See FigMuffler CleaningCooling System See Fig Spark PlugTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigTine Replacement See Figs , 25 To Adjust Carburetor Fuel System StorageOther Engine OILTroubleshooting Points Repair Parts Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side Transmission Tine Shield KEY Part NO. NO. DescriptionTine Assembly Decals Service Notes 12.10.09 AP/SR

CRT1350LS specifications

The Husqvarna CRT1350LS is a robust and dynamic ride-on mower designed for residential and commercial mowing needs. It combines power and precision, making lawn maintenance an effortless task. With a premium design and advanced technology, this mower stands out in the competitive landscape of lawn care equipment.

One of the standout features of the CRT1350LS is its powerful 13.5 HP engine. This engine not only delivers remarkable performance but also ensures reliability and longevity. The mower is designed with a durable steel cutting deck, measuring 50 inches, which allows for efficient mowing of larger areas. The high-capacity deck design ensures that grass clippings are evenly distributed, providing a professional-looking finish every time.

The cutting height can be easily adjusted, offering five different settings ranging from 1.5 to 4 inches. This versatility allows users to customize their mowing experience, accommodating different grass types and conditions. Furthermore, the CRT1350LS features an integrated mulching system that finely chops grass clippings, returning them to the lawn to provide natural nutrients and reduce waste.

Husqvarna has incorporated advanced technologies into the CRT1350LS to enhance user experience. The model is equipped with a comfortable, ergonomic seat designed for optimum comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that all necessary functions are easily accessible, allowing for effortless operation.

Another notable characteristic of this mower is its hydrostatic transmission system. This technology provides seamless speed changes without the need for gear shifting, enabling the operator to maintain speed while tackling uneven terrain. The CRT1350LS also has a tight turning radius, making it easy to maneuver around obstacles in the yard.

For safety, the CRT1350LS includes features such as an automatic blade brake system that engages when the operator leaves the seat, minimizing the risk of accidents. The robust construction, combined with easy-to-access maintenance points, ensures that upkeep is simple and effective, extending the life of the mower.

In summary, the Husqvarna CRT1350LS is an exceptional ride-on mower that excels in performance, comfort, and technology. Its powerful engine, adjustable cutting height, and user-friendly design make it an ideal choice for maintaining pristine lawns, offering both residential and commercial users the tools they need for effective lawn care.
Top Page Image Contents