Husqvarna CRT1350LS owner manual Troubleshooting Points

Page 19

TROUBLESHOOTING POINTS

PROBLEM

 

CAUSE

 

CORRECTION

Will not start

1.

Out of fuel.

1.

Fill fuel tank.

 

2.

Engine not “CHOKED” properly.

2.

See “TO START ENGINE” in Operation section.

 

3.

Engine flooded.

3.

Wait several minutes before attempting to start.

 

4.

Dirty air cleaner.

4.

Clean or replace air cleaner cartridge.

 

5.

Water in fuel.

5.

Empty fuel tank and carburetor, and refill tank with fresh,

 

 

 

 

clean gasoline.

 

6.

Clogged fuel tank.

6.

Remove fuel tank and clean.

 

7.

Loose spark plug wire.

7.

Make sure spark plug wire is seated properly on plug.

 

8.

Bad spark plug or improper gap.

8.

Replace spark plug or adjust gap.

 

9.

Carburetor out of adjustment.

9.

Make necessary adjustments.

 

10.

Oil soaked air filter.

10.

Replace air filter.

 

 

 

 

 

Hard to start

1.

Throttle control not set properly.

1.

Place throttle control in “FAST” position.

 

2.

Dirty air cleaner.

2.

Clean or replace air cleaner cartridge.

 

3.

Bad spark plug or improper gap.

3.

Replace spark plug or adjust gap.

 

4.

Stale or dirty fuel.

4.

Empty fuel tank and refill tank with fresh, clean gasoline.

 

5.

Loose spark plug wire.

5.

Make sure spark plug wire is seated properly on plug.

 

6.

Carburetor out of adjustment.

6.

Make necessary adjustments.

 

 

 

 

 

Loss of power

1.

Engine is overloaded.

1.

Set depth stake for shallower tilling.

 

2.

Dirty air cleaner.

2.

Clean or replace air cleaner cartridge.

 

3.

Low oil level/dirty oil.

3.

Check oil level/change oil.

 

4.

Faulty spark plug.

4.

Clean and regap or change spark plug.

 

5.

Oil in fuel.

5.

Empty and clean fuel tank and refill tank, and clean

 

 

 

 

carburetor.

 

6.

Stale or dirty fuel.

6.

Empty fuel tank and refill tank with fresh, clean gasoline.

 

7.

Water in fuel.

7.

Empty fuel tank and carburetor, and refill tank with fresh,

 

 

 

 

clean gasoline.

 

8.

Clogged fuel tank.

8.

Remove fuel tank and clean.

 

9.

Spark plug wire loose.

9.

Connect and tighten spark plug wire.

 

10.

Dirty engine air screen.

10.

Clean engine air screen.

 

11.

Dirty/clogged muffler.

11.

Clean/replace muffler.

 

12.

Carburetor out of adjustment.

12.

Make necessary adjustments.

 

13.

Poor compression.

13.

Contact an authorized service center/department.

 

 

 

 

 

Engine overheats

1.

Low oil level/dirty oil.

1.

Check oil level/change oil.

 

2.

Dirty engine air screen.

2.

Clean engine air screen.

 

3.

Dirty engine.

3.

Clean cylinder fins, air screen, and muffler area.

 

4.

Partially plugged muffler.

4.

Remove and clean muffler.

 

5.

Improper carburetor adjustment.

5.

Adjust carburetor to richer position.

 

 

 

 

 

Excessive bounce/

1.

Ground too dry and hard.

1.

Moisten ground or wait for more favorable soil

difficult handling

 

 

 

conditions.

 

 

 

 

 

Soil balls up or clumps

1.

Ground too wet.

1.

Wait for more favorable soil conditions.

 

 

 

 

 

Engine runs but tiller

1.

Drive control bar is not engaged.

1.

Engage drive control.

won’t move

2.

V-belt not correctly adjusted.

2.

Inspect/adjust V-belt.

 

3.

V-belt is off pulley(s).

3.

Inspect V-belt.

 

 

 

 

 

Engine runs but labors

1.

Tilling too deep.

1.

Set depth stake for shallower tilling.

when tilling

2.

Throttle control not properly adjusted.

2.

Check throttle control setting.

 

3.

Carburetor out of adjustment.

3.

Make necessary adjustments.

 

 

 

 

 

Tines will not rotate

1.

Shear pin(s) broken.

1.

Replace shear pin(s).

 

 

 

 

 

19

Image 19
Contents CRT1350LS Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateOperation Meets Ansi Safety RequirementsKnow Your Tiller HOW to USE Your Tiller ADD Gasoline Before Starting EngineTo Transport Check Engine OIL Level SeeTilling Hints Tine Shear PinsCultivating General Recommendations MaintenanceMaintenance Schedule Lubrication ChartAIR Filter See Fig EngineSpark Plug CleaningCooling System See Fig MufflerTiller Service and AdjustmentsTire Care To Replace Ground Drive Belt See Fig Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25 To Adjust Carburetor Engine OIL StorageOther Fuel SystemTroubleshooting Points Handle Assembly Repair PartsMAINFRAME, Left Side MAINFRAME, Right Side Transmission KEY Part NO. NO. Description Tine ShieldTine Assembly Decals Service Notes 12.10.09 AP/SR

CRT1350LS specifications

The Husqvarna CRT1350LS is a robust and dynamic ride-on mower designed for residential and commercial mowing needs. It combines power and precision, making lawn maintenance an effortless task. With a premium design and advanced technology, this mower stands out in the competitive landscape of lawn care equipment.

One of the standout features of the CRT1350LS is its powerful 13.5 HP engine. This engine not only delivers remarkable performance but also ensures reliability and longevity. The mower is designed with a durable steel cutting deck, measuring 50 inches, which allows for efficient mowing of larger areas. The high-capacity deck design ensures that grass clippings are evenly distributed, providing a professional-looking finish every time.

The cutting height can be easily adjusted, offering five different settings ranging from 1.5 to 4 inches. This versatility allows users to customize their mowing experience, accommodating different grass types and conditions. Furthermore, the CRT1350LS features an integrated mulching system that finely chops grass clippings, returning them to the lawn to provide natural nutrients and reduce waste.

Husqvarna has incorporated advanced technologies into the CRT1350LS to enhance user experience. The model is equipped with a comfortable, ergonomic seat designed for optimum comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that all necessary functions are easily accessible, allowing for effortless operation.

Another notable characteristic of this mower is its hydrostatic transmission system. This technology provides seamless speed changes without the need for gear shifting, enabling the operator to maintain speed while tackling uneven terrain. The CRT1350LS also has a tight turning radius, making it easy to maneuver around obstacles in the yard.

For safety, the CRT1350LS includes features such as an automatic blade brake system that engages when the operator leaves the seat, minimizing the risk of accidents. The robust construction, combined with easy-to-access maintenance points, ensures that upkeep is simple and effective, extending the life of the mower.

In summary, the Husqvarna CRT1350LS is an exceptional ride-on mower that excels in performance, comfort, and technology. Its powerful engine, adjustable cutting height, and user-friendly design make it an ideal choice for maintaining pristine lawns, offering both residential and commercial users the tools they need for effective lawn care.