Husqvarna CRT1350LS owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 18

STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

•Clean entire tiller (See “CLEANING” in the Maintenance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent.

•Use fresh fuel next season.

NOTE: Fuel stablizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stablizer container. Run engine at least 10 minutes after adding stablizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug.

•Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly several times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to an- other.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER TILLER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CRT1350LS Training Safety RulesMaintenance and Storage PreparationTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Install Handle See Figs , 4, Unpacking Carton See FigRemove Tiller from Crate Attach Clutch Cable See FigConnect Shift ROD See Fig Check Tire PressureMeets Ansi Safety Requirements OperationKnow Your Tiller HOW to USE Your Tiller Check Engine OIL Level See Before Starting EngineTo Transport ADD GasolineTine Shear Pins Tilling HintsCultivating Lubrication Chart MaintenanceMaintenance Schedule General RecommendationsEngine AIR Filter See FigMuffler CleaningCooling System See Fig Spark PlugService and Adjustments TillerTire Care Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigTine Replacement See Figs , 25 To Adjust Carburetor Fuel System StorageOther Engine OILTroubleshooting Points Repair Parts Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side Transmission Tine Shield KEY Part NO. NO. DescriptionTine Assembly Decals Service Notes 12.10.09 AP/SR

CRT1350LS specifications

The Husqvarna CRT1350LS is a robust and dynamic ride-on mower designed for residential and commercial mowing needs. It combines power and precision, making lawn maintenance an effortless task. With a premium design and advanced technology, this mower stands out in the competitive landscape of lawn care equipment.

One of the standout features of the CRT1350LS is its powerful 13.5 HP engine. This engine not only delivers remarkable performance but also ensures reliability and longevity. The mower is designed with a durable steel cutting deck, measuring 50 inches, which allows for efficient mowing of larger areas. The high-capacity deck design ensures that grass clippings are evenly distributed, providing a professional-looking finish every time.

The cutting height can be easily adjusted, offering five different settings ranging from 1.5 to 4 inches. This versatility allows users to customize their mowing experience, accommodating different grass types and conditions. Furthermore, the CRT1350LS features an integrated mulching system that finely chops grass clippings, returning them to the lawn to provide natural nutrients and reduce waste.

Husqvarna has incorporated advanced technologies into the CRT1350LS to enhance user experience. The model is equipped with a comfortable, ergonomic seat designed for optimum comfort during extended mowing sessions. Additionally, the intuitive control layout ensures that all necessary functions are easily accessible, allowing for effortless operation.

Another notable characteristic of this mower is its hydrostatic transmission system. This technology provides seamless speed changes without the need for gear shifting, enabling the operator to maintain speed while tackling uneven terrain. The CRT1350LS also has a tight turning radius, making it easy to maneuver around obstacles in the yard.

For safety, the CRT1350LS includes features such as an automatic blade brake system that engages when the operator leaves the seat, minimizing the risk of accidents. The robust construction, combined with easy-to-access maintenance points, ensures that upkeep is simple and effective, extending the life of the mower.

In summary, the Husqvarna CRT1350LS is an exceptional ride-on mower that excels in performance, comfort, and technology. Its powerful engine, adjustable cutting height, and user-friendly design make it an ideal choice for maintaining pristine lawns, offering both residential and commercial users the tools they need for effective lawn care.
Top Page Image Contents