Husqvarna T536 manual Cutting equipment, Battery charger safety, General rules

Page 14

GENERAL SAFETY PRECAUTIONS

Battery charger safety

Only use Chargers, Husqvarna QC, for charging the Husqvarna replacement batteries, BLi.

!

WARNING! Minimise the risk of electric

shock or short circuit as follows:

Never insert any object into the charger’s cooling slots.

Do not try to dismantle the battery charger.

Never connect the charger terminals to metal objects as this can short circuit the battery charger.

Use approved and intact wall sockets.

•Regularly check that the battery charger connection wire is intact and that there are no cracks in it.

•Never carry the battery charger using the cord and never pull out the plug by pulling the cord.

•Keep all cables and extension leads away from water, oil and sharp edges. Make sure the cable is not jammed in doors, fences or the like. Otherwise it can cause the charger to become live.

WARNING! Do not use the battery

! charger close to corrosive or flammable materials. Do not cover the battery charger. Pull out the plug to the battery charger in the event of smoke or fire. Remember the risk of fire.

Do not use:

•a faulty or damaged battery charger or never use a faulty, damaged or deformed battery.

Do not charge:

•non-rechargeable batteries in the battery charger or use them in the machine.

•the battery in the battery charger outdoors.

•the battery in the rain or in wet conditions.

•the battery in direct sunlight.

14 – English

Use the battery charger only when the surrounding temperature is between 5 °C and 40 °C. Use the charger in an environment which is well ventilated, dry and free from dust.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of kickback.

•Reduce the risk of the saw chain breaking or jumping off the bar.

•Obtain optimal cutting performance.

•Extend the life of cutting equipment.

•Avoid increasing vibration levels.

General rules

•Only use cutting equipment recommended by us! See instructions under the heading Technical data.

•Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents.

•Maintain the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback.

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents T536 LiXP Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsChain saw safety warnings Battery tool use and careService Causes and operator prevention of kickbackBefore using a new chain saw Always use common senseMachine′s safety equipment Personal protective equipmentChain brake and front hand guard Automatic switch off functionalityKeypad Throttle lockout Chain catcherVibrations Battery and battery chargerBattery safety General rules Battery charger safetyCutting equipment Shock or short circuit as followsSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackSharpening cutting teeth Sharpening instructions considerablyIncreases the risk of kickback Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too largeFilling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationOperator Chain drive sprocketChecking wear on cutting equipment Fitting a spike bumper AssemblyFitting the bar and chain Or checking is done on the machine Working with the chainBattery charger Battery HandlingBattery status LED display Charging status Disposal of the battery, battery charger and machineTransport and storage Starting Starting and StoppingStarting and stopping Stopping Before use Basic safety rulesWorking Techniques SavECleaning Drive system causing the saw chainRemove the battery before any To jam. Always deactivate the machineGeneral requirements working at height Preparing to use the saw in the treeStarting the saw in the tree Using the chainsaw in the treeSecuring the work position for two-handed use One-hand use of the chainsawBasic cutting technique Felling direction Tree felling techniqueSafe distance Your saw Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Directional cutsWith a diameter larger than the bar length of your saw General adviceFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?General MaintenancePower trigger lockout Checking the front hand guardCooling system Battery connectorsLubricating the bar tip sprocket Battery Battery chargerMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceLED display Possible faults Possible action Troubleshooting scheduleKeypad Possible faults Possible action Technical Data Technical dataApplies to Europe only Guide bar and saw chain combinationsSaw chain filing and file gauges EC Declaration of Conformity Page Page Page 1156445-26

T536 specifications

The Husqvarna T536 is a powerful and versatile battery-powered top-handled chainsaw designed for both professional arborists and homeowners who require high performance in a lightweight package. This innovative tool represents the latest advances in chainsaw technology, offering exceptional efficiency and convenience for a variety of cutting tasks.

One of the standout features of the T536 is its brushless motor, which provides superior torque and longevity compared to traditional brushed motors. This advanced technology not only enhances the performance of the saw but also contributes to its energy efficiency, enabling users to work longer on a single charge. The T536 is equipped with a high-capacity battery that allows for extended run times, making it ideal for a full day’s work without the worry of swapping batteries frequently.

The chainsaw utilizes a 12-inch bar, making it perfectly suited for pruning, trimming, and other precision cutting tasks. The lightweight design, weighing just around 2.7 kg (6.0 lbs), ensures easy maneuverability and reduces fatigue during prolonged usage.

One of the key characteristics of the T536 is its user-friendly interface. It features an intuitive keypad that allows for easy operation, along with a soft-grip handle for maximum comfort during use. The integrated rear and front hand guards provide added safety while also enhancing the overall ergonomics of the saw.

Husqvarna has incorporated its unique X-Torq engine technology, which reduces emissions and ensures a quieter operation. This is a significant advantage for users working in noise-sensitive environments, as it complies with stringent noise regulations. Additionally, the T536 is compatible with Husqvarna’s low-kickback chains, contributing to improved safety and control during cutting.

Another notable feature is the automatic chain lubrication system, which ensures optimal lubrication and increases the lifespan of the chain. The tool-less chain tensioning system is a practical addition that allows for quick and easy adjustments, minimizing downtime during work.

The Husqvarna T536 is not just powerful; it is also environmentally friendly. As a battery-powered chainsaw, it produces zero emissions during operation, making it a sustainable choice for those conscious of their carbon footprint. This feature makes it an excellent choice for professionals and homeowners alike who are looking to maintain their outdoor spaces without sacrificing performance or the environment.

In summary, the Husqvarna T536 blends technology, performance, and user convenience into a reliable tool. With its brushless motor, lightweight design, and safety features, it is an excellent choice for anyone seeking a high-quality top-handled chainsaw that can meet diverse cutting needs while prioritizing comfort and sustainability.
Top Page Image Contents