Husqvarna T536 manual Sharpening instructions considerably, Increases the risk of kickback

Page 16

GENERAL SAFETY PRECAUTIONS

•A sharp chain eats its way through the wood and produces long, thick chips or shavings.

•The cutting part of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge

(B). The cutters cutting depth is determined by the difference in height between the two (depth gauge setting).

When you sharpen a cutting tooth there are four important factors to remember.

1 Filing angle

2Cutting angle

3File position

4Round file diameter

It is very difficult to sharpen a chain correctly without the right equipment. We recommend that you use our file

gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain.

See instructions under the heading Technical data for information about sharpening your chain.

 

!

WARNING! Departure from the

 

sharpening instructions considerably

 

 

increases the risk of kickback.

 

 

 

Sharpening cutting teeth

Li-ion

To sharpen cutting teeth you will need a round file and a file gauge. See instructions under the heading Technical data for information on the size of file and gauge that are recommended for the chain fitted to your chain saw.

•Check that the chain is correctly tensioned. A slack chain will move sideways, making it more difficult to sharpen correctly.

•Always file cutting teeth from the inside face. Reduce the pressure on the return stroke. File all the teeth on one side first, then turn the chain saw over and file the teeth on the other side.

•File all the teeth to the same length. When the length of the cutting teeth is reduced to 4 mm (5/32") the chain is worn out and should be replaced.

16 – English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents T536 LiXP Symbols on the machine KEY to SymbolsSymbols on the battery and/or on the battery charger Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsBattery tool use and care ServiceChain saw safety warnings Causes and operator prevention of kickbackBefore using a new chain saw Always use common senseMachine′s safety equipment Personal protective equipmentKeypad Automatic switch off functionalityChain brake and front hand guard Throttle lockout Chain catcherBattery safety Battery and battery chargerVibrations Battery charger safety Cutting equipmentGeneral rules Shock or short circuit as followsSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackIncreases the risk of kickback Sharpening instructions considerablySharpening cutting teeth General advice on adjusting depth gauge setting Adjustment of depth gauge settingTensioning the chain Too largeLubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketOperator Assembly Fitting the bar and chainFitting a spike bumper Or checking is done on the machine Working with the chainBattery status Battery HandlingBattery charger Transport and storage Disposal of the battery, battery charger and machineLED display Charging status Starting and stopping Starting and StoppingStarting Stopping Basic safety rules Working TechniquesBefore use SavEDrive system causing the saw chain Remove the battery before anyCleaning To jam. Always deactivate the machineGeneral requirements working at height Preparing to use the saw in the treeUsing the chainsaw in the tree Securing the work position for two-handed useStarting the saw in the tree One-hand use of the chainsawBasic cutting technique Safe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreat Felling Training we advise you not to fell treesYour saw Directional cutsGeneral advice Freeing a tree that has fallen badlyWith a diameter larger than the bar length of your saw Freeing a trapped treeHow to avoid kickback What is kickback?Maintenance Power trigger lockoutGeneral Checking the front hand guardLubricating the bar tip sprocket Battery connectorsCooling system Battery Battery chargerMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceKeypad Possible faults Possible action Troubleshooting scheduleLED display Possible faults Possible action Technical Data Technical dataSaw chain filing and file gauges EC Declaration of Conformity Guide bar and saw chain combinationsApplies to Europe only Page Page Page 1156445-26

T536 specifications

The Husqvarna T536 is a powerful and versatile battery-powered top-handled chainsaw designed for both professional arborists and homeowners who require high performance in a lightweight package. This innovative tool represents the latest advances in chainsaw technology, offering exceptional efficiency and convenience for a variety of cutting tasks.

One of the standout features of the T536 is its brushless motor, which provides superior torque and longevity compared to traditional brushed motors. This advanced technology not only enhances the performance of the saw but also contributes to its energy efficiency, enabling users to work longer on a single charge. The T536 is equipped with a high-capacity battery that allows for extended run times, making it ideal for a full day’s work without the worry of swapping batteries frequently.

The chainsaw utilizes a 12-inch bar, making it perfectly suited for pruning, trimming, and other precision cutting tasks. The lightweight design, weighing just around 2.7 kg (6.0 lbs), ensures easy maneuverability and reduces fatigue during prolonged usage.

One of the key characteristics of the T536 is its user-friendly interface. It features an intuitive keypad that allows for easy operation, along with a soft-grip handle for maximum comfort during use. The integrated rear and front hand guards provide added safety while also enhancing the overall ergonomics of the saw.

Husqvarna has incorporated its unique X-Torq engine technology, which reduces emissions and ensures a quieter operation. This is a significant advantage for users working in noise-sensitive environments, as it complies with stringent noise regulations. Additionally, the T536 is compatible with Husqvarna’s low-kickback chains, contributing to improved safety and control during cutting.

Another notable feature is the automatic chain lubrication system, which ensures optimal lubrication and increases the lifespan of the chain. The tool-less chain tensioning system is a practical addition that allows for quick and easy adjustments, minimizing downtime during work.

The Husqvarna T536 is not just powerful; it is also environmentally friendly. As a battery-powered chainsaw, it produces zero emissions during operation, making it a sustainable choice for those conscious of their carbon footprint. This feature makes it an excellent choice for professionals and homeowners alike who are looking to maintain their outdoor spaces without sacrificing performance or the environment.

In summary, the Husqvarna T536 blends technology, performance, and user convenience into a reliable tool. With its brushless motor, lightweight design, and safety features, it is an excellent choice for anyone seeking a high-quality top-handled chainsaw that can meet diverse cutting needs while prioritizing comfort and sustainability.
Top Page Image Contents