Husqvarna T536 Lubricating cutting equipment, Filling with chain oil, Checking chain lubrication

Page 18

GENERAL SAFETY PRECAUTIONS

pull the saw chain round freely by hand, and that there is no slack on the underside of the bar.

The position of the chain tensioning screw on our chain saws varies from model to model. See instructions under the heading What is what? to find out where it is on your model.

Lubricating cutting equipment

WARNING! Poor lubrication of cutting ! equipment may cause the chain to snap,

which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

•All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The saw chain oil tank is designed to last aproximately three battery charges. However, this safety feature requires that you use the right sort of chain oil (if the chain oil is to thin it will last shorter time).

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

•In temperatures below 0°C (32°F) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

•Contact your service agent when choosing chain oil.

Checking chain lubrication

•Check the chain lubrication every third battery charge. See instructions under the heading Lubricating the bar tip sprocket. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

•Check that the groove in the edge of the bar is clean. Clean if necessary.

•Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your service agent.

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents T536 LiXP KEY to Symbols Symbols on the machineSymbols on the battery and/or on the battery charger Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsChain saw safety warnings Battery tool use and careService Causes and operator prevention of kickbackBefore using a new chain saw Always use common senseMachine′s safety equipment Personal protective equipmentAutomatic switch off functionality KeypadChain brake and front hand guard Throttle lockout Chain catcherBattery and battery charger Battery safetyVibrations General rules Battery charger safetyCutting equipment Shock or short circuit as followsSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackSharpening instructions considerably Increases the risk of kickbackSharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too largeFilling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentOperator Fitting a spike bumper AssemblyFitting the bar and chain Or checking is done on the machine Working with the chainBattery Handling Battery statusBattery charger Disposal of the battery, battery charger and machine Transport and storageLED display Charging status Starting and Stopping Starting and stoppingStarting Stopping Before use Basic safety rulesWorking Techniques SavECleaning Drive system causing the saw chainRemove the battery before any To jam. Always deactivate the machineGeneral requirements working at height Preparing to use the saw in the treeStarting the saw in the tree Using the chainsaw in the treeSecuring the work position for two-handed use One-hand use of the chainsawBasic cutting technique Tree felling technique Safe distanceFelling direction Your saw Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Directional cutsWith a diameter larger than the bar length of your saw General adviceFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?General MaintenancePower trigger lockout Checking the front hand guardBattery connectors Lubricating the bar tip sprocketCooling system Battery Battery chargerMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTroubleshooting schedule Keypad Possible faults Possible actionLED display Possible faults Possible action Technical Data Technical dataGuide bar and saw chain combinations Saw chain filing and file gauges EC Declaration of ConformityApplies to Europe only Page Page Page 1156445-26

T536 specifications

The Husqvarna T536 is a powerful and versatile battery-powered top-handled chainsaw designed for both professional arborists and homeowners who require high performance in a lightweight package. This innovative tool represents the latest advances in chainsaw technology, offering exceptional efficiency and convenience for a variety of cutting tasks.

One of the standout features of the T536 is its brushless motor, which provides superior torque and longevity compared to traditional brushed motors. This advanced technology not only enhances the performance of the saw but also contributes to its energy efficiency, enabling users to work longer on a single charge. The T536 is equipped with a high-capacity battery that allows for extended run times, making it ideal for a full day’s work without the worry of swapping batteries frequently.

The chainsaw utilizes a 12-inch bar, making it perfectly suited for pruning, trimming, and other precision cutting tasks. The lightweight design, weighing just around 2.7 kg (6.0 lbs), ensures easy maneuverability and reduces fatigue during prolonged usage.

One of the key characteristics of the T536 is its user-friendly interface. It features an intuitive keypad that allows for easy operation, along with a soft-grip handle for maximum comfort during use. The integrated rear and front hand guards provide added safety while also enhancing the overall ergonomics of the saw.

Husqvarna has incorporated its unique X-Torq engine technology, which reduces emissions and ensures a quieter operation. This is a significant advantage for users working in noise-sensitive environments, as it complies with stringent noise regulations. Additionally, the T536 is compatible with Husqvarna’s low-kickback chains, contributing to improved safety and control during cutting.

Another notable feature is the automatic chain lubrication system, which ensures optimal lubrication and increases the lifespan of the chain. The tool-less chain tensioning system is a practical addition that allows for quick and easy adjustments, minimizing downtime during work.

The Husqvarna T536 is not just powerful; it is also environmentally friendly. As a battery-powered chainsaw, it produces zero emissions during operation, making it a sustainable choice for those conscious of their carbon footprint. This feature makes it an excellent choice for professionals and homeowners alike who are looking to maintain their outdoor spaces without sacrificing performance or the environment.

In summary, the Husqvarna T536 blends technology, performance, and user convenience into a reliable tool. With its brushless motor, lightweight design, and safety features, it is an excellent choice for anyone seeking a high-quality top-handled chainsaw that can meet diverse cutting needs while prioritizing comfort and sustainability.
Top Page Image Contents