Husqvarna T536 manual Assembly, Fitting the bar and chain, Fitting a spike bumper

Page 20

ASSEMBLY

Fitting the bar and chain

Li-ion

WARNING! Always remove the battery ! before any assembly, maintenance and/

or checking is done on the machine.

!

WARNING! Always wear gloves, when

working with the chain.

• Check that the chain brake is in disengaged position

by moving the front hand guard towards the front handle.

•Unscrew the bar nut and remove the drive sprocket cover. Remove the transportation guard (A).

A

•Fit the bar over the bar bolt. Place the bar in its rearmost position. Place the chain over the drive sprocket and in the groove on the bar. Begin on the top side of the bar.

•Make sure that the edges of the cutting links are facing forward on the top edge of the bar.

•Fit the drive sprocket cover and locate the chain adjuster pin in the cut-out in the guide bar. Check that the drive links of the saw chain fit correctly on the drive

sprocket and that the saw chain is in the groove in the guide bar. Tighten the bar nut finger-tight.

•Tension the chain by turning the chain tensioning screw clockwise using the combination spanner. The chain should be tensioned until it does not sag from the underside of the bar. See instructions under the heading Tensioning the chain.

•The chain is correctly tensioned when there is no slack on the underside of the bar, and it can still be turned easily by hand. Tighten the bar nut with the combination spanner while holding up the tip of the bar.

•When fitting a new chain, the chain tension has to be checked frequently until the chain is run-in. Check the chain tension regularly. A correctly tensioned chain ensures good cutting performance and long life.

Fitting a spike bumper

To fit a spike bumper – contact your service agent.

20 – English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents T536 LiXP Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions General power tool safety warningsBattery tool use and care ServiceChain saw safety warnings Causes and operator prevention of kickbackBefore using a new chain saw Always use common senseMachine′s safety equipment Personal protective equipmentChain brake and front hand guard Automatic switch off functionalityKeypad Throttle lockout Chain catcherVibrations Battery and battery chargerBattery safety Battery charger safety Cutting equipmentGeneral rules Shock or short circuit as followsSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackSharpening cutting teeth Sharpening instructions considerablyIncreases the risk of kickback General advice on adjusting depth gauge setting Adjustment of depth gauge settingTensioning the chain Too largeLubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationOperator Chain drive sprocketChecking wear on cutting equipment Assembly Fitting the bar and chainFitting a spike bumper Or checking is done on the machine Working with the chainBattery charger Battery HandlingBattery status LED display Charging status Disposal of the battery, battery charger and machineTransport and storage Starting Starting and StoppingStarting and stopping Stopping Basic safety rules Working TechniquesBefore use SavEDrive system causing the saw chain Remove the battery before anyCleaning To jam. Always deactivate the machineGeneral requirements working at height Preparing to use the saw in the treeUsing the chainsaw in the tree Securing the work position for two-handed useStarting the saw in the tree One-hand use of the chainsawBasic cutting technique Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreat Felling Training we advise you not to fell treesYour saw Directional cutsGeneral advice Freeing a tree that has fallen badlyWith a diameter larger than the bar length of your saw Freeing a trapped treeHow to avoid kickback What is kickback?Maintenance Power trigger lockoutGeneral Checking the front hand guardCooling system Battery connectorsLubricating the bar tip sprocket Battery Battery chargerMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceLED display Possible faults Possible action Troubleshooting scheduleKeypad Possible faults Possible action Technical Data Technical dataApplies to Europe only Guide bar and saw chain combinationsSaw chain filing and file gauges EC Declaration of Conformity Page Page Page 1156445-26

T536 specifications

The Husqvarna T536 is a powerful and versatile battery-powered top-handled chainsaw designed for both professional arborists and homeowners who require high performance in a lightweight package. This innovative tool represents the latest advances in chainsaw technology, offering exceptional efficiency and convenience for a variety of cutting tasks.

One of the standout features of the T536 is its brushless motor, which provides superior torque and longevity compared to traditional brushed motors. This advanced technology not only enhances the performance of the saw but also contributes to its energy efficiency, enabling users to work longer on a single charge. The T536 is equipped with a high-capacity battery that allows for extended run times, making it ideal for a full day’s work without the worry of swapping batteries frequently.

The chainsaw utilizes a 12-inch bar, making it perfectly suited for pruning, trimming, and other precision cutting tasks. The lightweight design, weighing just around 2.7 kg (6.0 lbs), ensures easy maneuverability and reduces fatigue during prolonged usage.

One of the key characteristics of the T536 is its user-friendly interface. It features an intuitive keypad that allows for easy operation, along with a soft-grip handle for maximum comfort during use. The integrated rear and front hand guards provide added safety while also enhancing the overall ergonomics of the saw.

Husqvarna has incorporated its unique X-Torq engine technology, which reduces emissions and ensures a quieter operation. This is a significant advantage for users working in noise-sensitive environments, as it complies with stringent noise regulations. Additionally, the T536 is compatible with Husqvarna’s low-kickback chains, contributing to improved safety and control during cutting.

Another notable feature is the automatic chain lubrication system, which ensures optimal lubrication and increases the lifespan of the chain. The tool-less chain tensioning system is a practical addition that allows for quick and easy adjustments, minimizing downtime during work.

The Husqvarna T536 is not just powerful; it is also environmentally friendly. As a battery-powered chainsaw, it produces zero emissions during operation, making it a sustainable choice for those conscious of their carbon footprint. This feature makes it an excellent choice for professionals and homeowners alike who are looking to maintain their outdoor spaces without sacrificing performance or the environment.

In summary, the Husqvarna T536 blends technology, performance, and user convenience into a reliable tool. With its brushless motor, lightweight design, and safety features, it is an excellent choice for anyone seeking a high-quality top-handled chainsaw that can meet diverse cutting needs while prioritizing comfort and sustainability.
Top Page Image Contents