Husqvarna 455e, 465 Starter, Changing a broken or worn starter cord, Tensioning the recoil spring

Page 34

MAINTENANCE

use a muffler if the spark arrestor mesh is missing or defective.

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may cause fire if directed against dry and combustible material.

Starter

WARNING! When the recoil spring is

!wound up in the starter housing it is under tension and can, if handled carelessly, pop out and cause personal injury.

Care must be exercised when replacing the return spring or the starter cord. Wear protective glasses and protective gloves.

Changing a broken or worn starter cord

•Loosen the screws that hold the starter against the crankcase and remove the starter.

•Pull out the cord approx. 30 cm and hook it into the notch in the rim of the pulley. Release the recoil spring by letting the pulley rotate slowly backwards.

1 2

•Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley. Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the centre of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

•Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned at least a further 1/2 turn when the starter cord is pulled all the way out.

1

2

Changing a broken recoil spring

•Lift off the pulley. See instructions under heading Changing a broken or worn starter cord.

•Remove the recoil spring from inside the pulley by tapping the pulley lightly with its inside face downwards against a work bench or the like. If the spring pops out during fitting, wind it up again, working from the outside in towards centre.

•Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.

34 – English

Page 33 Page 35
Image 34
Page 33 Page 35
Contents English Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping system Stop switchCutting equipment MufflerGeneral rules Cutting equipment designed to reduce kickbackSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain 455e Rancher II, 455e Rancher II TrioBrake Rancher II, 460 Rancher II, 465 RancherLubricating cutting equipment Chain drive sprocket Filling with chain oilChecking chain lubrication Needle bearing lubricationGuide bar Fitting the bar and chain AssemblyWorking with the chain Fitting a spike bumper Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageStarting Starting and StoppingStarting and stopping Cold engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique Tree felling technique Safe distanceClearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburettor adjustment MaintenanceGeneral Checking the inertia brake release Muffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springNeedle bearing lubrication Air filterSpark plug Fitting the starterTemperature 0C or colder Adjustment of the oil pumpAir Injection centrifugal cleaning Cooling systemTemperature -5C or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataRancher Engine Guide bar and saw chain combinations Saw chain filing and file gaugesApplies to Europe only EC-declaration of conformityEN ISO 121002010, ISO 149821998, EN ISO Page Original instructions 1154135-26
Related manuals
Manual 44 pages 48.45 Kb

455, 455e, 460, 465 specifications

The Husqvarna 460 and 455 series chainsaws are some of the most popular models in their class, recognized for their reliability, performance, and advanced technology. These machines are designed to meet the demands of both professionals and enthusiasts who require powerful tools for cutting firewood, felling trees, or performing tree maintenance.

The Husqvarna 460 is equipped with a robust 60.3 cc engine that delivers impressive power and efficiency. With a power output of approximately 3.6 kW, this chainsaw is capable of handling ambitious cutting tasks with ease. The design of the 460 includes a low-vibration system that significantly reduces operator fatigue during extended use. This is achieved through effective isolating features that dampen vibrations transferred to the user's hands, allowing for more comfortable operation over longer periods.

One of the standout features of the Husqvarna 460 is its X-Torq engine technology. This innovative design reduces fuel consumption by up to 20% while also decreasing harmful exhaust emissions. This is increasingly important for environmentally conscious users, as it allows for a greener operation without compromising performance. The chainsaw is also equipped with an air injection system that effectively removes larger particles from the air before they reach the filtration system, ensuring cleaner air intake and extending the lifespan of the air filter.

On the other hand, the Husqvarna 455 Rancher is another exceptional model known for its versatility and robust design. Featuring a slightly smaller 55.5 cc engine, it offers a solid power output of around 2.6 kW, making it suitable for a wide range of tasks from cutting firewood to clearing brush. The 455 Rancher shares many of the same technological advancements as the 460, including the X-Torq engine and low-vibration technology, providing users with similar benefits in terms of efficiency and comfort.

Both models feature an adjustable oil pump for better chain lubrication, ensuring smooth operation and prolonging the chain's life. Additionally, the easy access air filter and tool-less chain tensioning allow for quick maintenance and adjustments in the field, making them user-friendly choices.

Overall, the Husqvarna 460 and 455 series chainsaws combine power, efficiency, and advanced technology, catering to the needs of both casual users and professionals alike. Their thoughtful design and robust performance establish them as reliable tools in any cutting task, making them a top choice for those in need of high-quality chainsaws.
Top Page Image Contents