Husqvarna 570, 575XP manual Maintenance schedule

Page 38

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain brake

 

for wear. Replace when less than 0.6 mm

Clean the outside of the machine.

converter, check the cooling system

(0,024 inch) remains at the most worn

 

weekly.

 

point.

 

 

 

 

 

Check that the components of the throttle

Check the starter, starter cord and return

Check the clutch centre, clutch drum and

control work safely. (Throttle lock and

spring.

clutch spring for wear.

throttle control.)

 

 

 

 

 

Clean the chain brake and check that it

 

 

operates safely. Make sure that the chain

Check that the vibration damping

Clean the spark plug. Check that the

catcher is undamaged, and replace it if

elements are not damaged.

electrode gap is 0.5 mm (0,020 inch).

necessary.

 

 

 

 

 

The bar should be turned daily for more

 

 

even wear. Check the lubrication hole in

 

 

the bar, to be sure it is not clogged. Clean

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

the bar groove. If the bar has a sprocket

 

 

tip, this should be lubricated.

 

 

 

 

 

Check that the bar and chain are getting

File off any burrs from the edges of the

Check fuel hose for cracks or other

sufficient oil.

bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to visible

 

 

cracks in the rivets and links, whether the

Clean or replace the spark arrestor mesh

 

saw chain is stiff or whether the rivets and

Empty the fuel tank and clean the inside.

links are abnormally worn. Replace if

on the muffler.

 

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its tension

 

 

and condition. Check the drive sprocket

Clean the carburetor compartment.

Empty the oil tank and clean the inside.

for excessive wear and replace if

 

 

necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if necessary.

Check all cables and connections.

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks from

 

 

the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic converter,

 

 

check the cooling system daily.

 

 

 

 

 

38 – English

Page 37 Page 39
Image 38
Page 37 Page 39
Contents 570 575XP You will find the following labels on your chain saw KEY to SymbolsKey to symbols Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Instructions considerably increases the risk of kickbackIf the depth gauge setting is too large General advice on adjusting depth gauge settingAdjustment of depth gauge setting Tensioning the chainFilling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentAssembly Fitting the bar and chainFuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Terms Basic cutting techniqueGeneral Limbing CuttingFelling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling cut FellingDirectional cuts Freeing a tree that has fallen badly Freeing a trapped treeGeneral advice How to avoid kickbackWhat is kickback? Cutting trees and branches that are in tensionCutting the trunk into logs General MaintenanceCarburetor adjustment Checking brake band wear Correctly adjusted carburetorHigh speed jet H Checking the front hand guardChecking the brake trigger When the bar hits the stump the brake should be appliedChecking the inertia brake release Muffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springLubricating the bar tip sprocket Air filterSpark plug Needle bearing lubricationWhen making adjustments Adjustment of the oil pumpAir Injection centrifugal cleaning Cooling systemWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataTechnical Data Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsKickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage 1140240-95 ´z+H8¶5m¨ ´z+H8¶5m¨

570, 575XP specifications

The Husqvarna 570 and 575XP chainsaws are remarkable tools designed for professional logger and forestry applications. Built for performance, durability, and ease of use, both models are engineered to handle the demands of heavy-duty cutting tasks while delivering outstanding power-to-weight ratios.

One of the standout features of the Husqvarna 570 is its X-Torq engine technology, which is designed to provide increased power while reducing fuel consumption and emissions. This engine technology allows the chainsaw to operate more efficiently, making it an environmentally friendly choice for users who are conscious about their impact on nature. The 575XP model also comes equipped with the X-Torq engine, delivering exceptional performance in a compact design.

Both models feature Husqvarna’s Air Injection system, which helps to minimize wear and tear by filtering out larger particles before they reach the air filter. This not only extends the life of the air filter but also allows for longer operating times between cleanings, thus improving overall efficiency.

The ergonomic design of the Husqvarna 570 and 575XP enhances operator comfort and control. The chainsaws come with a low-vibration system, which significantly reduces vibrations felt by the operator, making extended use more comfortable. The front and rear handles are designed for optimal grip, allowing for better maneuverability and reducing operator fatigue during prolonged cutting sessions.

Another key characteristic is the quick-release air filter, which allows for easy access for maintenance. This feature is particularly beneficial for professionals who need to ensure their equipment remains in peak condition.

In terms of safety, both models include a chain brake that provides instant stopping capabilities for added security during operation. This is a crucial feature when working in potentially hazardous environments.

With their combination of innovative technologies, ergonomic design, and robust performance, the Husqvarna 570 and 575XP chainsaws stand out in the market as reliable tools for professionals needing efficiency and power. Whether tackling large trees or performing forestry maintenance, these chainsaws are designed to deliver exceptional results.
Top Page Image Contents