Husqvarna 455 RANCHER manual Cutting equipment, Stop switch, Muffler, General rules

Page 10

GENERAL SAFETY PRECAUTIONS

Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting with cutting equipment that is blunt or faulty (wrong type or badly sharpened) will increase the vibration level.

WARNING! Overexposure to vibration can

!lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. These symptoms may be increased in cold temperatures.

Stop switch

Use the stop switch to switch off the engine.

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.

WARNING! The exhaust fumes from the

!engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

In areas with a hot, dry climate there is a high risk of fires. These areas are sometimes subject to government rules requiring among other things the muffler must be equipped with an approved type of spark arrestor mesh.

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and servicing the machine’s safety equipment.

CAUTION! The muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/ or vapours.

WARNING! Never use a saw without a

!muffler, or with a damaged muffler. A damaged muffler may substantially increase the noise level and the fire hazard. Keep fire fighting equipment handy. If a spark arrestor screen is required in your area, never use the saw without or with a broken spark arrestor screen.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of kickback.

•Reduce the risk of the saw chain breaking or jumping off the bar.

•Obtain optimal cutting performance.

•Extend the life of cutting equipment.

•Avoid increasing vibration levels.

General rules

•Only use cutting equipment recommended by us! See instructions under the heading Technical data.

•Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents.

•Maintain the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback.

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rancher Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? 20 19 What is what on the chain saw?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Right hand guard Throttle lockChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral advice on adjusting depth gauge setting Sharpening cutting teethLubricating cutting equipment Adjustment of depth gauge settingTensioning the chain Chain oilNeedle bearing lubrication Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentBar Fitting a spike bumper AssemblyFitting the bar and chain Working with the chainFuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsAlways use a fast cutting speed, i.e. full throttle General Basic cutting techniqueTerms Cutting LimbingLog is supported at one end. There is a high risk that it Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatDirectional cuts FellingFelling cut Freeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral Correctly adjusted carburettor High speed jet HThrottle lock Starter MufflerChanging a broken or worn starter cord Tensioning the recoil spring Air filterSpark plug Changing a broken recoil springLubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Needle bearing lubricationTemperature -5C or colder Air Injection centrifugal cleaningTemperature 0C or colder Winter useMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data´z+H8h¶6S¨ 38 English´z+H8h¶6S¨ Bar and chain combinationsApplies to Europe only EC-declaration of conformityEN ISO 12100-22003, Cispr 122001, EN ISO 1140247-26 ´z+H8h¶6S¨ ´z+H8h¶6S¨
Related manuals
Manual 4 pages 16.25 Kb

455 RANCHER specifications

The Husqvarna 455 Rancher is a powerful chainsaw designed for both professional users and avid homeowners. Renowned for its robust construction and unparalleled performance, this chainsaw is an excellent choice for those who demand reliability and accuracy in their outdoor tasks.

At the heart of the 455 Rancher is its 55.5 cc X-Torq engine, which offers a perfect blend of power and fuel efficiency. This advanced engine technology reduces fuel consumption by up to 20% while simultaneously minimizing exhaust emissions, making it an environmentally conscious choice. The system also provides higher torque over a wider RPM range, ensuring that users have the power they need when cutting through larger logs or tough wood.

The 455 Rancher features a high output air filtration system, which enhances the lifespan of the chainsaw by ensuring the engine stays clean and well-protected from dust and debris. This system is particularly beneficial for users who work in dusty or challenging environments, as it requires less frequent filter cleaning and replacement.

Another notable characteristic of the Husqvarna 455 Rancher is its anti-vibration technology. This feature minimizes vibrations during operation, significantly reducing operator fatigue and enabling longer and more comfortable use. The chainsaw also comes equipped with an ergonomic design, including a well-balanced construction that allows for better maneuverability.

Safety is paramount with the 455 Rancher, which is equipped with a variety of safety features. The chain brake is a critical component that helps prevent accidental injury by halting the chain's movement in the event of kickback. Additionally, the chainsaw includes a low kickback chain designed to lessen the risk of kickback incidents while cutting.

The chainsaw boasts an adjustable oil pump that allows users to control the amount of oil delivered to the chain, ensuring optimal lubrication and extending the life of the chain and bar. Combined with an easy-to-access fuel and oil tank, the Husqvarna 455 Rancher is engineered for user convenience.

In conclusion, the Husqvarna 455 Rancher stands out for its powerful engine, efficient fuel consumption, advanced safety features, and user-centric design. Whether for professional forestry work or home landscaping projects, this versatile and durable chainsaw is a reliable tool that can tackle a wide range of cutting tasks with ease.
Top Page Image Contents