Husqvarna 1153179-26 manual Starting and Stopping, Starting and stopping, Cold engine, Warm engine

Page 20

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before ! starting:

The chain brake must be engaged when the chain saw is started to reduce the chance of contact with the moving chain during starting.

Never start a chain saw unless the bar, chain and all covers are fitted correctly. Otherwise the clutch can come loose and cause personal injuries.

Place the machine on firm ground. Make sure you have a secure footing and that the chain cannot touch anything.

Keep people and animals well away from the working area.

Cold engine

Starting: The chain brake must be engaged when the chain saw is started. Activate the brake by moving the front hand guard forwards.

Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position.

Start throttle: The correct choke/start throttle setting is obtained by moving the control to the choke position.

If the machine is fitted with a decompression valve (A): Press the valve to reduce the pressure in the cylinder and make starting easier. You should always use the decompression valve when starting the machine. Once

the machine has started the valve will automatically return to its original setting.

A

Warm engine

Use the same procedure as for starting a cold engine but without setting the choke control in the choke position. The correct choke/start throttle setting is obtained by moving the choke control to the choke position and then pushing it in again.

Starting

Grip the front handle with your left hand. Hold the chain saw on the ground by placing your right foot through the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until you feel a resistance (as the starter pawls engage) then pull firmly and rapidly. Never twist the starter cord around your hand.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Push in the choke control as soon as the engine fires and keep pulling until the engine starts. When the engine starts, quickly apply full throttle; the throttle start lock will automatically disengage.

20 – English

Image 20
Contents Operator′s manual Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherStop switch Cutting equipmentRight hand guard Vibration damping systemGeneral rules Cutting equipment designed to reduce kickbackSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethSharpening instructions considerably Increases the risk of kickbackGeneral advice on adjusting depth gauge setting Adjustment of depth gauge settingTensioning the chain Too largeLubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication To prolong the life of the bar you should turn it over daily Assembly Fitting the bar and chainFitting a spike bumper Working with the chainFuel Handling FuelFuel safety FuellingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsJam. Always stop the engine before Clutch cover causing the chain toCleaning Basic cutting technique TermsLimbing Logs are lying together. SuchOr fatal injury Log is supported at both ends. There is a high riskTree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatTraining we advise you not to fell trees Your sawDirectional cuts Felling cutGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Maintenance Carburettor adjustmentGeneral Carburettor with movement limitersFine adjustment of the idle speed T Correctly adjusted carburettorCarburettor without movement limiters Low speed jet LRpm 357XP 14000 2700 359 13500 Checking the inertia brake release Checking brake band wearChecking the front hand guard Immediately Changing a broken or worn starter cord MufflerStarter Air filter Tensioning the recoil springChanging a broken recoil spring Fitting the starterAdjustment of the oil pump Spark plugLubricating the bar tip sprocket Needle bearing lubricationAir Injection centrifugal cleaning Temperature 0C or colderRunning when making adjustments Cooling system357 XPG, 359 G Heated handlesElectrical carburettor heating Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical data 357XP 359Bar and chain combinations Saw chain filing and file gaugesEN ISO 12100-22003, Cispr 122005, EN ISO EC-declaration of conformityApplies to Europe only Original instructions 1153179-26

1153179-26 specifications

The Husqvarna 1153179-26 is a powerful and efficient lawn mower designed for homeowners who seek a balance of performance and ease of use. One of the standout features of this model is its lightweight and compact design, making it easy to maneuver around your garden or yard. With a robust engine, it offers reliable performance, delivering the power needed to tackle various types of grass and terrain with ease.

Equipped with a cutting width of 26 inches, the Husqvarna 1153179-26 allows for efficient mowing over larger areas while still being able to navigate tight spots effectively. The adjustable cutting height adds to its versatility, enabling users to choose the perfect length for their lawns, whether they prefer a manicured look or a more natural appearance.

The mower incorporates advanced technologies that enhance its performance and user experience. The Smart Start feature enables quick and easy starting of the engine with minimal effort, so you can get to mowing without wastefully pulling on a cord multiple times. The air injection system ensures that the air filter remains clean, thereby prolonging the life of the engine and reducing maintenance needs.

Another excellent feature of the Husqvarna 1153179-26 is its ergonomic handle design, which allows for comfortable operation, reducing fatigue during extended mowing sessions. This is particularly beneficial for homeowners with larger properties who have to spend considerable time tending to their lawns.

Durability is a key characteristic of this model, as it features a sturdy construction designed to withstand the rigors of frequent use. The mower's materials are engineered to resist wear and damage, ensuring longevity and reliability.

Additionally, the Husqvarna 1153179-26 has a mulching capability, allowing you to recycle grass clippings back into your lawn, promoting healthier growth and reducing waste. This eco-friendly feature not only improves your lawn’s health but also minimizes the need for bagging and disposal.

In conclusion, the Husqvarna 1153179-26 combines portability, power, and advanced technology to provide an exceptional mowing experience. Its lightweight design, powerful engine, and user-friendly features make it an excellent choice for homeowners looking to maintain a beautiful lawn with ease.