Husqvarna 1153179-26 manual Working Techniques, Before use, General working instructions

Page 22

WORKING TECHNIQUES

Before use:

,

1Check that the chain brake works correctly and is not damaged.

2Check that the rear right hand guard is not damaged.

3Check that the throttle lockout works correctly and is not damaged.

4Check that the stop switch works correctly and is not damaged.

5Check that all handles are free from oil.

6Check that the anti vibration system works and is not damaged.

7Check that the muffler is securely attached and not damaged.

8Check that all parts of the chain saw are tightened correctly and that they are not damaged or missing.

9Check that the chain catcher is in place and not damaged.

10Check the chain tension.

General working instructions

IMPORTANT!

This section describes basic safety rules for using a chain saw. This information is never a substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your chain saw dealer, service agent or an experienced chain saw user. Do not attempt any task that you feel unsure of!

Before using a chain saw you must understand the effects of kickback and how to avoid them. See instructions under the heading How to avoid kickback.

Before using a chain saw you must understand the difference between cutting with the top and bottom edges of the bar. See instructions under the headings How to avoid kickback and Machine’s safety equipment.

Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.

Basic safety rules

1 Look around you:

•To ensure that people, animals or other things cannot affect your control of the machine.

•To make sure that none of the above might come within reach of your saw or be injured by falling trees.

CAUTION! Follow the instructions above, but do not use a chain saw in a situation where you cannot call for help in case of an accident.

2Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc.

3Take great care when removing small branches and avoid cutting bushes (i.e. cutting many small branches at the same time). Small branches can be grabbed by the chain and thrown back at you, causing serious injury.

4Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

5Take great care when cutting a tree that is in tension. A tree that is in tension may spring back to its normal position before or after being cut. If you position yourself incorrectly or make the cut in the wrong place the tree may hit you or the machine and cause you to

22 – English

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operator′s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Introduction Dear CustomerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawPersonal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherRight hand guard Stop switchCutting equipment Vibration damping systemGeneral rules Cutting equipment designed to reduce kickbackSharpening instructions considerably Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Increases the risk of kickbackTensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too largeFilling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationNeedle bearing lubrication Chain drive sprocketChecking wear on cutting equipment To prolong the life of the bar you should turn it over daily Fitting a spike bumper AssemblyFitting the bar and chain Working with the chainFuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsCleaning Clutch cover causing the chain toJam. Always stop the engine before Basic cutting technique TermsOr fatal injury LimbingLogs are lying together. Such Log is supported at both ends. There is a high riskFelling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatDirectional cuts Training we advise you not to fell treesYour saw Felling cutFreeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?General MaintenanceCarburettor adjustment Carburettor with movement limitersCarburettor without movement limiters Fine adjustment of the idle speed TCorrectly adjusted carburettor Low speed jet LRpm 357XP 14000 2700 359 13500 Checking the front hand guard Checking brake band wearChecking the inertia brake release Immediately Starter MufflerChanging a broken or worn starter cord Changing a broken recoil spring Air filterTensioning the recoil spring Fitting the starterLubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Needle bearing lubricationRunning when making adjustments Air Injection centrifugal cleaningTemperature 0C or colder Cooling systemElectrical carburettor heating Heated handles357 XPG, 359 G Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical data 357XP 359Bar and chain combinations Saw chain filing and file gaugesApplies to Europe only EC-declaration of conformityEN ISO 12100-22003, Cispr 122005, EN ISO Original instructions 1153179-26

1153179-26 specifications

The Husqvarna 1153179-26 is a powerful and efficient lawn mower designed for homeowners who seek a balance of performance and ease of use. One of the standout features of this model is its lightweight and compact design, making it easy to maneuver around your garden or yard. With a robust engine, it offers reliable performance, delivering the power needed to tackle various types of grass and terrain with ease.

Equipped with a cutting width of 26 inches, the Husqvarna 1153179-26 allows for efficient mowing over larger areas while still being able to navigate tight spots effectively. The adjustable cutting height adds to its versatility, enabling users to choose the perfect length for their lawns, whether they prefer a manicured look or a more natural appearance.

The mower incorporates advanced technologies that enhance its performance and user experience. The Smart Start feature enables quick and easy starting of the engine with minimal effort, so you can get to mowing without wastefully pulling on a cord multiple times. The air injection system ensures that the air filter remains clean, thereby prolonging the life of the engine and reducing maintenance needs.

Another excellent feature of the Husqvarna 1153179-26 is its ergonomic handle design, which allows for comfortable operation, reducing fatigue during extended mowing sessions. This is particularly beneficial for homeowners with larger properties who have to spend considerable time tending to their lawns.

Durability is a key characteristic of this model, as it features a sturdy construction designed to withstand the rigors of frequent use. The mower's materials are engineered to resist wear and damage, ensuring longevity and reliability.

Additionally, the Husqvarna 1153179-26 has a mulching capability, allowing you to recycle grass clippings back into your lawn, promoting healthier growth and reducing waste. This eco-friendly feature not only improves your lawn’s health but also minimizes the need for bagging and disposal.

In conclusion, the Husqvarna 1153179-26 combines portability, power, and advanced technology to provide an exceptional mowing experience. Its lightweight design, powerful engine, and user-friendly features make it an excellent choice for homeowners looking to maintain a beautiful lawn with ease.
Top Page Image Contents