Husqvarna 1151187-95 manual Fuel Handling, Fuel safety

Page 20

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

! Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Gasoline

CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded gasoline/oil mixture. Leaded gasoline will destroy the catalytic converter.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certified to operate on unleaded gasoline.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

Gasoline, litre

Two-stroke oil, litre

 

2% (1:50)

 

 

 

5

0,10

 

 

10

0,20

 

 

15

0,30

 

 

20

0,40

 

 

US gallon

US fl. oz.

 

 

1

2 1/2

 

 

2 1/2

6 1/2

 

 

5

12 7/8

 

 

20 – English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 232R 235R 235FR KEY to Symbols SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer thanContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system Quick releaseMuffler Locking nutGeneral rules Cutting equipmentCutting equipment Sharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head Fitting the handlebar 235R, 235FR AssemblyFitting the handlebar 232R Fitting a blade guard, grass blade and grass cutter 232R Transport position, handlebarAssembling the cutting equipment Fitting the blade guard and saw blade 232R Fitting the blade guard and saw blade 235R, 235FR Fitting a trimmer guard and Superauto II 1 trimmer head 232R Fitting other guards and cutting attachments 235R, 235FR AM LAdjusting the harness and clearing saw Spreading the load on your shouldersCorrect height Correct balanceFuel Fuel safetyFuel Handling Fueling MixingStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine StartingFor throttle handles with a start throttle lock StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearing Forestry clearing using a saw blade Grass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingCutting SweepingMaintenance CarburetorFine adjustment of the idle speed T Correctly adjusted carburetorLow speed jet L High speed jet HAdjusting the start throttle speed MufflerCooling system Remember the risk of fireCleaning the air filter Bevel gearAir filter Spark plugMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories 232R Type Approved accessories 235R, 235FR TypeFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsMAINTENANCE, Replacement Repair of EMISSION-RELATED Parts Super Auto Super Auto II Page T35, T35x Trimmy Hit Trimmy Hit Pro Trimmy SII Page S35 2,7mm 095-.106 25 m 15 cm T45, T45x Page Page Page Page 1151187-95

1151187-95 specifications

The Husqvarna 1151187-95 is a robust and reliable accessory designed to enhance the efficiency and functionality of Husqvarna outdoor power equipment. As part of a well-regarded brand known for its high-quality and durable tools, this model embodies advanced engineering and innovative features that cater to the needs of both professionals and homeowners alike.

One of the standout characteristics of the Husqvarna 1151187-95 is its ergonomic design, which ensures ease of use and comfort during operation. The user-friendly interface allows for quick adjustments and features that minimize fatigue, making long hours of work less daunting. The lightweight construction of this model adds to its portability, allowing users to transport and store the tool with ease.

The technology embedded in the Husqvarna 1151187-95 is noteworthy. It incorporates advanced vibration dampening, which significantly reduces the stress and strain on the user's hands and arms during prolonged usage. This feature not only enhances comfort but also promotes safety, enabling users to maintain better control of the equipment.

In addition to its ergonomic benefits, this model is built with durability in mind. The materials used in the construction of the Husqvarna 1151187-95 are designed to withstand harsh outdoor conditions, ensuring longevity and reliable performance in various environments. This robust build quality means that users can trust this tool to perform consistently and effectively over time.

Moreover, the Husqvarna 1151187-95 is compatible with a range of other Husqvarna products, creating flexibility for users who may own multiple tools. This interoperability streamlines the maintenance process, allowing users to switch between different attachments or components seamlessly.

In summary, the Husqvarna 1151187-95 combines ergonomic design, advanced technology, and durable construction to deliver a high-performance solution for outdoor work. Whether you are a landscaping professional or a weekend warrior, this tool is designed to enhance your efficiency and help you achieve exceptional results in your outdoor projects. Its emphasis on comfort and durability makes the Husqvarna 1151187-95 an excellent investment for anyone seeking reliable outdoor power equipment.
Top Page Image Contents