Husqvarna 1151187-95 manual ABC of clearing

Page 25

WORKING TECHNIQUES

The ABC of clearing

•Always use the correct equipment.

•Make sure the equipment is well adjusted.

•Follow the safety precautions.

•Organise your work carefully.

•Always use full throttle when starting to cut with the blade.

•Always use sharp blades.

•Avoid stones.

•Control the felling direction (take advantage of the wind).

WARNING! Neither the operator of the

!machine nor anyone else may attempt to remove the cut material while the engine is running or the cutting equipment is rotating, as this can result in serious injury.

Stop the engine and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards.You could get burnt if you touch it.

WARNING! Watch out for thrown objects.

!Always wear approved eye protection. Never lean over the cutting attachment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. Never swing the machine around without first checking behind you to make sure no- one is within the safety zone.

WARNING! Sometimes branches or

!grass get caught between the guard and cutting attachment. Always stop the engine before cleaning.

Working methods

WARNING! Machines fitted with saw

!blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. A blade thrust can be violent enough to cause the machine and/or operator to be propelled in any direction, and possibly lose control of the machine. Blade thrust can occur without warning if the machine snags, stalls or binds. Blade thrust is more likely to occur in areas where it is difficult to see the material being cut.

Avoid cutting with the area of the blade between the 12 o’clock and 3 o’clock positions. Because of the speed of rotation of the blade, blade thrust can occur if you attempt to cut thick stems with this area of the blade.

•Before you start clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc.

•Start at whichever end of the area is easiest, and clear an open space from which to work.

•Work systematically to and fro across the area, clearing a width of around 4-5 m on each pass. This exploits the full reach of the machine in both directions and gives the operator a convenient and varied working area to work in.

•Clear a strip around 75 m long. Move your fuel can as work progresses.

•On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.

•You should plan the strip so that you avoid going over ditches or other obstacles on the ground. You should also orient the strip to take advantage of wind

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 232R 235R 235FR Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer thanContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Quick releaseLocking nut MufflerCutting equipment Cutting equipmentGeneral rules Sharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Fitting the handlebar 232R AssemblyFitting the handlebar 235R, 235FR Assembling the cutting equipment Transport position, handlebarFitting a blade guard, grass blade and grass cutter 232R Fitting the blade guard and saw blade 232R Fitting the blade guard and saw blade 235R, 235FR Fitting a trimmer guard and Superauto II 1 trimmer head 232R AM L Fitting other guards and cutting attachments 235R, 235FRSpreading the load on your shoulders Adjusting the harness and clearing sawCorrect height Correct balanceFuel Handling Fuel safetyFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping Cold engineStarting Warm engineFor throttle handles with a start throttle lock StoppingWorking Techniques Basic safety rulesGeneral working instructions ABC of clearing Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TLow speed jet L High speed jet HMuffler Adjusting the start throttle speedCooling system Remember the risk of fireBevel gear Cleaning the air filterAir filter Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories 235R, 235FR Type Approved accessories 232R TypeYour Warranty Rights and Obligations Federal Emission Control Warranty StatementMAINTENANCE, Replacement Repair of EMISSION-RELATED Parts Super Auto Super Auto II Page T35, T35x Trimmy Hit Trimmy Hit Pro Trimmy SII Page S35 2,7mm 095-.106 25 m 15 cm T45, T45x Page Page Page Page 1151187-95

1151187-95 specifications

The Husqvarna 1151187-95 is a robust and reliable accessory designed to enhance the efficiency and functionality of Husqvarna outdoor power equipment. As part of a well-regarded brand known for its high-quality and durable tools, this model embodies advanced engineering and innovative features that cater to the needs of both professionals and homeowners alike.

One of the standout characteristics of the Husqvarna 1151187-95 is its ergonomic design, which ensures ease of use and comfort during operation. The user-friendly interface allows for quick adjustments and features that minimize fatigue, making long hours of work less daunting. The lightweight construction of this model adds to its portability, allowing users to transport and store the tool with ease.

The technology embedded in the Husqvarna 1151187-95 is noteworthy. It incorporates advanced vibration dampening, which significantly reduces the stress and strain on the user's hands and arms during prolonged usage. This feature not only enhances comfort but also promotes safety, enabling users to maintain better control of the equipment.

In addition to its ergonomic benefits, this model is built with durability in mind. The materials used in the construction of the Husqvarna 1151187-95 are designed to withstand harsh outdoor conditions, ensuring longevity and reliable performance in various environments. This robust build quality means that users can trust this tool to perform consistently and effectively over time.

Moreover, the Husqvarna 1151187-95 is compatible with a range of other Husqvarna products, creating flexibility for users who may own multiple tools. This interoperability streamlines the maintenance process, allowing users to switch between different attachments or components seamlessly.

In summary, the Husqvarna 1151187-95 combines ergonomic design, advanced technology, and durable construction to deliver a high-performance solution for outdoor work. Whether you are a landscaping professional or a weekend warrior, this tool is designed to enhance your efficiency and help you achieve exceptional results in your outdoor projects. Its emphasis on comfort and durability makes the Husqvarna 1151187-95 an excellent investment for anyone seeking reliable outdoor power equipment.
Top Page Image Contents