Husqvarna 1150901-95 manual Lubricating cutting equipment, Filling with chain oil

Page 15

GENERAL SAFETY PRECAUTIONS

The position of the chain tensioning screw on our chain saws varies from model to model. See instructions under the heading What is what? to find out where it is on your model.

Lubricating cutting equipment

WARNING! Poor lubrication of cutting

! equipment may cause the chain to snap, which could lead to serious, even fatal injuries.

Chain oil

Chain oil must demonstrate good adhesion to the chain and also maintain its flow characteristics regardless of whether it is warm summer or cold winter weather.

As a chain saw manufacturer we have developed an optimal chain oil which has a vegetable oil base. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage. If our own chain oil is not available, standard chain oil is recommended.

Never use waste oil! Using waste oil can be dangerous to you and damage the machine and environment.

IMPORTANT! When using vegetable based saw chain oil, dismantle and clean the groove in the bar and saw chain before long-term storage. Otherwise there is a risk of the saw chain oil oxidizing, which will result in the saw chain becoming stiff and the bar tip sprocket jamming.

Filling with chain oil

•All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The saw chain oil tank and the fuel tank are designed so that the fuel runs out before the saw chain oil.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a lean mixture may mean that the fuel lasts longer than the oil) and that you also use the recommended cutting equipment (a bar that is too long will use more chain oil).

Checking chain lubrication

•Check the chain lubrication each time you refuel. See instructions under the heading Lubricating the bar tip sprocket.

Aim the tip of the bar at a light coloured surface about 20 cm (8 inches) away. After 1 minute running at 3/4

throttle you should see a distinct line of oil on the light surface.

If the chain lubrication is not working:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

•Check that the groove in the edge of the bar is clean. Clean if necessary.

•Check that the bar tip sprocket turns freely and that the lubricating hole in the tip sprocket is not blocked. Clean and lubricate if necessary.

If the chain lubrication system is still not working after carrying out the above checks and associated measures you should contact your servicing dealer.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s manual 357XP EPA I 359 EPA KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerCutting equipment designed to reduce kickback BarChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Lubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Assembly Fitting the bar and chainWorking with the chain Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueLimbing Clearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionFelling Directional cutsFelling cut Freeing a tree that has fallen badly Freeing a trapped treeCutting trees and branches that are in tension Cutting the trunk into logs How to avoid kickbackWhat is kickback? General adviceMaintenance Carburetor adjustmentGeneral High speed jet H Correctly adjusted carburetorImmediately Checking the brake triggerMuffler Changing a broken recoil spring StarterChanging a broken or worn starter cord Tensioning the recoil springFitting the starter Air filterSpark plug Lubricating the bar tip sprocketNeedle bearing lubrication Adjustment of the oil pumpAir Injection centrifugal cleaning When making adjustmentsElectrical carburetor heating Temperature 0C 32F or colderWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataBar and chain combinations 050058 Saw chain filing and file gauges Repair or Replacement of Parts Repair or Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1150901-95

1150901-95 specifications

The Husqvarna 1150901-95 is a powerful and versatile chainsaw designed for both professional and home use. Known for its reliability and high-performance capabilities, this model stands out in the market for its advanced features and user-friendly design.

One of the main features of the Husqvarna 1150901-95 is its lightweight design. Weighing in at just 10.8 pounds, it provides excellent maneuverability, allowing users to handle various cutting tasks with ease. This makes it an ideal choice for homeowners who need a saw for occasional yard work as well as for professionals who require a tool that won’t fatigue them during long hours of operation.

Powering this chainsaw is a robust 40.9 cc X-Torq engine, which delivers a strong power-to-weight ratio. This engine technology ensures that users receive excellent fuel efficiency, helping reduce emissions while maximizing performance and cutting speed. The X-Torq technology provides significant torque at lower RPMs, allowing for smooth cutting through tough wood without bogging down the engine.

The Husqvarna 1150901-95 also features a revolutionary Air Injection system, which is designed to remove larger dust and debris particles before they reach the air filter. This innovation ensures that the engine maintains optimal performance even in challenging conditions, reducing the frequency of air filter cleaning and extending the lifespan of the saw.

Another key characteristic is the chainsaw's ergonomic design. It comes with an adjustable handle for enhanced comfort, allowing users to maintain a secure grip and better control over the saw while performing various cuts. The anti-vibration technology further minimizes fatigue, making it easier to handle for extended periods.

Safety is a priority with the Husqvarna 1150901-95, which includes features such as a chain brake that helps prevent injuries by stopping the chain instantly in the event of kickback. The saw also boasts a low kickback chain, which provides added protection during use.

In summary, the Husqvarna 1150901-95 is a well-rounded chainsaw that combines lightweight design, powerful performance, and innovative technologies. With its user-friendly features and commitment to safety, it is a reliable tool for anyone looking to tackle cutting tasks efficiently and confidently. Whether you are a seasoned professional or a weekend warrior, this chainsaw is built to meet your needs.
Top Page Image Contents