Husqvarna 1150901-95 manual General Safety Precautions, Before using a new chain saw

Page 7

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw

•Please read this manual carefully.

•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

•Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping.

•Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

•Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may

! the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.Your warranty may not cover damage or liability caused by the use of non- authorized accessories or replacement parts.

WARNING! A chain saw is a dangerous

! tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand the contents of this operator’s manual.

WARNING! The inside of the muffler

! contain chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Long term inhalation of the

! engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

WARNING! The ignition system of this

! machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacemakers. To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

Important

IMPORTANT!

The machine is only designed for cutting wood.

You should only use the saw with the bar and chain combinations we recommend in the chapter Technical data.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

Never use any accessories other than those recommended in this manual. See instructions under the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face visor to reduce the risk of injury from thrown objects. A chain saw is capable of throwing objects, such as wood chips, small pieces of wood, etc, at great force.This can result in serious injury, especially to the eyes.

WARNING! Running an engine in a

! confined or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

WARNING! Faulty cutting equipment or

! the wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the headingTechnical data.

Always use common sense

It is not possible to cover every conceivable situation you can face when using a chain saw. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. Do not hesitate to contact your dealer or us if you have any questions about the use of the chain saw. We will willingly be of service and provide you with advice as well as help you to use your chain saw both efficiently and safely. Attend a training course in chain saw usage if

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s manual 357XP EPA I 359 EPA Symbols on the machine KEY to SymbolsSymbols in the operator’s manual EPA Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerBar Cutting equipment designed to reduce kickbackChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Filling with chain oil Lubricating cutting equipmentChecking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueLimbing Clearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionDirectional cuts FellingFelling cut Freeing a trapped tree Freeing a tree that has fallen badlyCutting trees and branches that are in tension Cutting the trunk into logs How to avoid kickbackWhat is kickback? General adviceCarburetor adjustment MaintenanceGeneral High speed jet H Correctly adjusted carburetorImmediately Checking the brake triggerMuffler Changing a broken recoil spring StarterChanging a broken or worn starter cord Tensioning the recoil springFitting the starter Air filterSpark plug Lubricating the bar tip sprocketNeedle bearing lubrication Adjustment of the oil pumpAir Injection centrifugal cleaning When making adjustmentsElectrical carburetor heating Temperature 0C 32F or colderWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical Data050 Bar and chain combinations058 Saw chain filing and file gauges Repair or Replacement of Parts Repair or Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1150901-95

1150901-95 specifications

The Husqvarna 1150901-95 is a powerful and versatile chainsaw designed for both professional and home use. Known for its reliability and high-performance capabilities, this model stands out in the market for its advanced features and user-friendly design.

One of the main features of the Husqvarna 1150901-95 is its lightweight design. Weighing in at just 10.8 pounds, it provides excellent maneuverability, allowing users to handle various cutting tasks with ease. This makes it an ideal choice for homeowners who need a saw for occasional yard work as well as for professionals who require a tool that won’t fatigue them during long hours of operation.

Powering this chainsaw is a robust 40.9 cc X-Torq engine, which delivers a strong power-to-weight ratio. This engine technology ensures that users receive excellent fuel efficiency, helping reduce emissions while maximizing performance and cutting speed. The X-Torq technology provides significant torque at lower RPMs, allowing for smooth cutting through tough wood without bogging down the engine.

The Husqvarna 1150901-95 also features a revolutionary Air Injection system, which is designed to remove larger dust and debris particles before they reach the air filter. This innovation ensures that the engine maintains optimal performance even in challenging conditions, reducing the frequency of air filter cleaning and extending the lifespan of the saw.

Another key characteristic is the chainsaw's ergonomic design. It comes with an adjustable handle for enhanced comfort, allowing users to maintain a secure grip and better control over the saw while performing various cuts. The anti-vibration technology further minimizes fatigue, making it easier to handle for extended periods.

Safety is a priority with the Husqvarna 1150901-95, which includes features such as a chain brake that helps prevent injuries by stopping the chain instantly in the event of kickback. The saw also boasts a low kickback chain, which provides added protection during use.

In summary, the Husqvarna 1150901-95 is a well-rounded chainsaw that combines lightweight design, powerful performance, and innovative technologies. With its user-friendly features and commitment to safety, it is a reliable tool for anyone looking to tackle cutting tasks efficiently and confidently. Whether you are a seasoned professional or a weekend warrior, this chainsaw is built to meet your needs.
Top Page Image Contents