Husqvarna 1150901-95 manual Maintenance schedule

Page 38

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.024 inch (0.6 mm) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0.020 inch (0.5 mm).

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check fuel hose for cracks or other

getting sufficient oil.

the bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

screen on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the

Clean the carburetor compartment.

Empty the oil tank and clean the

drive sprocket for excessive wear and

inside.

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

38 – English

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator’s manual 357XP EPA I 359 EPA Symbols in the operator’s manual KEY to SymbolsSymbols on the machine EPA Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Checking chain lubrication Lubricating cutting equipmentFilling with chain oil Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Working with the chain AssemblyFitting the bar and chain Fuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLimbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling cut FellingDirectional cuts Cutting trees and branches that are in tension Freeing a tree that has fallen badlyFreeing a trapped tree General advice How to avoid kickbackWhat is kickback? Cutting the trunk into logsGeneral MaintenanceCarburetor adjustment Correctly adjusted carburetor High speed jet HChecking the brake trigger ImmediatelyMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springLubricating the bar tip sprocket Air filterSpark plug Fitting the starterWhen making adjustments Adjustment of the oil pumpAir Injection centrifugal cleaning Needle bearing lubricationHeated handles Temperature 0C 32F or colderWinter use Electrical carburetor heatingMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data058 Bar and chain combinations050 Saw chain filing and file gauges Federal Emission Control Warranty Statement Repair or Replacement of Parts Repair orKickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions1150901-95

1150901-95 specifications

The Husqvarna 1150901-95 is a powerful and versatile chainsaw designed for both professional and home use. Known for its reliability and high-performance capabilities, this model stands out in the market for its advanced features and user-friendly design.

One of the main features of the Husqvarna 1150901-95 is its lightweight design. Weighing in at just 10.8 pounds, it provides excellent maneuverability, allowing users to handle various cutting tasks with ease. This makes it an ideal choice for homeowners who need a saw for occasional yard work as well as for professionals who require a tool that won’t fatigue them during long hours of operation.

Powering this chainsaw is a robust 40.9 cc X-Torq engine, which delivers a strong power-to-weight ratio. This engine technology ensures that users receive excellent fuel efficiency, helping reduce emissions while maximizing performance and cutting speed. The X-Torq technology provides significant torque at lower RPMs, allowing for smooth cutting through tough wood without bogging down the engine.

The Husqvarna 1150901-95 also features a revolutionary Air Injection system, which is designed to remove larger dust and debris particles before they reach the air filter. This innovation ensures that the engine maintains optimal performance even in challenging conditions, reducing the frequency of air filter cleaning and extending the lifespan of the saw.

Another key characteristic is the chainsaw's ergonomic design. It comes with an adjustable handle for enhanced comfort, allowing users to maintain a secure grip and better control over the saw while performing various cuts. The anti-vibration technology further minimizes fatigue, making it easier to handle for extended periods.

Safety is a priority with the Husqvarna 1150901-95, which includes features such as a chain brake that helps prevent injuries by stopping the chain instantly in the event of kickback. The saw also boasts a low kickback chain, which provides added protection during use.

In summary, the Husqvarna 1150901-95 is a well-rounded chainsaw that combines lightweight design, powerful performance, and innovative technologies. With its user-friendly features and commitment to safety, it is a reliable tool for anyone looking to tackle cutting tasks efficiently and confidently. Whether you are a seasoned professional or a weekend warrior, this chainsaw is built to meet your needs.
Top Page Image Contents