Husqvarna Explore Superior Performance with Blowers

Page 27

TECHNICAL DATA

Engine

 

Cylinder volume, cm3:

25,4

Cylinder bore, mm:

34

Stroke, mm:

28

Idling speed, rpm:

3.000

Max. speed – blowing, rpm:

8.200

Max. speed – vacuuming, rpm:

7.400

Max. engine output to ISO 8893:

0.9 kW/9000 rpm

Catalytic converter muffler

Yes

Ignition system

 

Manufacturer/type of ignition system:

Walbro MB/CD

Spark plug:

Champion RCJ 7Y

Electrode gap, mm:

0.5

Fuel and lubrication system

 

Manufacturer/type of carburetor:

Walbro/WT

Fuel tank volume, liters:

0.4

Weight

 

Weight, without fuel but with blower tube

 

and standard nozzle fitted, kg:

5.1

Noise levels

 

Equivalent noise pressure level at

 

operator’s ear. Weighted value for 50%

 

idling and 50% full throttle to ISO 7182,

 

dB(A):

92

Equivalent sound power level, measured

 

to ISO 9207, dB(A):

102

Vibration levels

 

Vibration levels at the handle, measured

 

according to ISO 7505, m/s2

 

Idling speed, front/rear handle:

2.6

Max. speed, front/rear handle:

4.2

Fan

 

Type:

Radial fan

Max. air velocity, m/s (km/h):

57 (206)

Air volume using a standard nozzle, m3/h:

425

Air volume without nozzle and tube, m3/h:

665

Air volume with vacuuming device, m3/h:

560

English – 25

Image 27
Contents Operator´s manual Svenska Contents Introduction Stop KEY to SymbolsFuel safety Safety InstructionsPersonal safety equipment Personal safetySafety equipment Safety while operating the blowerOther safety measures Blower DescriptionAccessories Muffler16 Stop switchThrottle lock Anti-vibration systemOther equipment Choke Adjusting the carburetorFuel cap Air filterTwo-stroke oil Fuel HandlingFuel mixture GasolineFuelling MixtureStopping Starting and StoppingStarting a cold engine Starting a warm engineBlowing Using the BlowerTo blow away debris on the ground Fitting the blower tube and nozzle on the blowerHigh-velocity nozzle To vacuum debris from the ground Fitting the collection bag with the various vacuum tubesVacuuming Using the Blower Carburetor MaintenanceBasic factory settings AdjustmentCooling system Spark plug Air filterTo change a broken or worn cord Starter deviceTo tension the recoil spring To change the recoil springMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenance Engine Technical DataYour Warranty Rights Obligations Emission Control Warranty StatementSvenska Svenska Svenska 2000W01