Husqvarna 150BF Safety Precautions, Working Conditions, Working Circumstance, Avoid Noise Problem

Page 6
WORKING CONDITIONS

English

Safety Precautions

WORKING CONDITIONS

1.Refrain from operating the blower if you are tired, ill, or upset, or if you are under the influence of alcohol, drugs or medication

2.To reduce the risk of hearing loss associated with soundlevels,hearingprotectionisrequired.

3.To reduce the risk of injury associated with thrown objects,

always wear eye protection and foot protection. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries.

4. To reduce the risk of injury associated with the inhalation of dust, use a face filter mask in dusty conditions.

5. Wear rubber-soled shoes or shoes with some other form of anti-slip protection to help protect you against falling.

6.To reduce the risk of injury associated with objects being

drawn into rotating parts, do not wear loose clothing, scarves, neck chains, hair longer than shoulder length, or other loose material.

7.Prolonged use of a blower, exposing the operator to vibrations and cold, may produce whitefinger disease (Raynaud’s phenomenon), the symptoms of which include tingling and burning sensations followed by loss of color and numbness in the fingers. All factors which contribute to whitefinger disease are not known, but cold weather, smoking diseases or physical conditions as well as long periods of exposure to vibration are mentioned as factors. In order to reduce the risk of whitefinger disease, the following precautions are strongly recommended

a)Keep your body warm. Never use the blower during rain.

b)Wear thick anti-vibration gloves.

c)Take more than 5 minutes of break in a warm place fre- quently.

d)Maintain a firm grip at all times, but do not squeeze the handles with constant, exces- sive pressure.

e)If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doctor before it gets worse.

8.The ignition system of your unit produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, people with pacemaker should consult their physician and the pacemaker manufacturer before operating this tool.

WORKING CIRCUMSTANCE

1. To reduce the risk of injury associated with exhaust fume inhalation, do not operate in unventilated area. The exhaust gases contain harmful carbon monoxide.

2.Avoid using the blower where stable footing and balance are not assured.

3.Never operate the machine in high wind, bad weather, potentially explosive atmosphere, when visibility is poor or in very high or low temperatures. (Our recommended use environment is below 40 degrees C (104 degrees F).)

AVOID NOISE PROBLEM

WORKING CIRCUMSTANCENOTE

Check and follow the local regulations as to sound levels and hours of operations for blower.

1.Operate power equipment only at reasonable hours, not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances.

2.To reduce sound levels, limit the number of pieces of equipment used at any one time.

3.Operate power blowers at the lowest possible throttle speed to do the job.

4.Check your equipment before operation, especially the muffler, air intakes and air filters.

WORKING PLAN

To reduce the risk of health damages, avoid excessive use and take sufficient time to rest .

FUEL

AVOID NOISE PROBLEMWARNING

To reduce the risk of fire and burn injury:

a)Handle fuel with care. It is highly flammable.

b)Do not smoke while handing fuel.

c)Do not refuel a hot engine.

d)Do not refuel a running engine.

e)Avoid spilling fuel or oil. Always wipe unit dry before using.

f ) Move at least 10 ft. (3 meters)

away from the fueling point before starting the engine.

g)Always store gasoline in a container approved for flammable liquids.

h)Make sure the unit is properly assembled and in good operating condition.

i ) Do not use the blower near a fire, as aiming the blower in the direction of a flame may cause flammable substances to ignite.

6

Image 6
Contents 150BT/BF 170BT/BF 180BT/BF English Operator’s manual130BT 115FEDERAL EMISSION CONTROL WARRANTY STATEMENT Maintenance ContentsSafety Warning labels on the machineSAFETY FIRST SafetyWarning labels on the machine SymbolsSymbols on the machine Safety PrecautionsWORKING CIRCUMSTANCE AVOID NOISE PROBLEMWORKING CONDITIONS WORKING PLANUSING THE PRODUCT BEFORE STARTING THE ENGINEMAINTENANCE TRANSPORTATIONSTORAGE What is what? 130BT150BT/BF 150BT150BF 170BT/BF 170BT170BF 180BT/BF 180BT180BF Technical data prEN15503 ISO7917 dB AAssembly „ WAIST BELT 150BT/BF 170BT/BF 180BT/BF „ BLOWER TUBES„ HARNESS F9 F10 F11„ FUEL Fuel„ HOW TO MIX FUEL „ FUELING THE UNITOperation „ ADJUSTING IDLE SPEED „ STOPPING ENGINEMaintenance „ AIR CLEANERF32 F33 „ FUEL FILTER„ SPARK PLUG „ MUFFLER„ IGNITION COIL AIR GAP INSPECTION Storage„ AIR INLET NET „ SHOLDER STRAP