Lexmark C950 Troubleshooting, Solving basic printer problems, Understanding printer messages

Troubleshooting 214

Troubleshooting

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

•The power cord is plugged into the printer and a properly grounded electrical outlet.

•The electrical outlet is not turned off by any switch or breaker.

•The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.

•Other electronic equipment plugged into the outlet is working.

•The printer is turned on. Check the printer power switch.

•The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.

•All options are properly installed.

•The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.

Understanding printer messages

An error has occured with the Flash Drive. Please remove and re-insert the drive.

Try one or more of the following:

•Remove and reinsert the flash drive.

•If the error message remains, the flash memory may be defective and require replacing.

Bin 2 is unable to lower, remove paper and check for an obstruction

Try one or more of the following:

•Remove paper and clear any obstruction from the bin.

•Touch Continue to clear the message and continue printing.

Change [paper source] to [custom type name]

Try one or more of the following:

•Touch Use current [paper source] to ignore the message and print from the selected tray.

•Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the printer control panel Paper menu, and then touch Paper changed, continue.

•Touch Cancel job to cancel the print job.