Lexmark C950 manual TCP/IP menu, Understanding printer menus 113

Understanding printer menus		113
	Menu item	Description
	View Network Address	Lets you view the network addresses
	UAA
	LAA
	End‑of‑Job Timeout	Sets the amount of time in seconds before a network print job is canceled
	0–225	Notes:
		• 90 seconds is the factory default setting.
		• 0 disables the timeout.
		• If a value of 1–9 is selected, then the setting is saved as 10.
	Banner Page	Allows the printer to print a banner page
	Off	Note: Off is the factory default setting.
	On

TCP/IP menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > TCP/IP

Note: This menu is available only in network models or printers attached to print servers.

Menu item	Description
Activate	Activates TCP/IP
On	Note: On is the factory default setting.
Off
Set Hostname	Lets you set the current TCP/IP hostname
	Note: This can be changed only from the Embedded Web Server.
IP Address	Lets you view or change the current TCP/IP address
	Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
	settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
	support BOOTP and RARP.
Netmask	Lets you view or change the current TCP/IP netmask
Gateway	Lets you view or change the current TCP/IP gateway
Enable DHCP	Specifies the DHCP address and parameter assignment setting
On	Note: On is the factory default setting.
Off
Enable RARP	Specifies the RARP address assignment setting
On	Note: On is the factory default setting.
Off
Enable BOOTP	Specifies the BOOTP address assignment setting
On	Note: On is the factory default setting.
Off