Lexmark C950 manual AppleTalk menu, Standard USB menu, Understanding printer menus 116, View Name

Understanding printer menus 116

AppleTalk menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk

Menu item	Description
Activate	Activates AppleTalk support
Yes	Note: Yes is the factory default setting.
No
View Name	Shows the assigned AppleTalk name
	Note: The name can be changed only from the Embedded Web Server.
View Address	Shows the assigned AppleTalk address
	Note: The address can be changed only from the Embedded Web Server.
Set Zone	Provides a list of AppleTalk zones available on the network
[default]	Note: When “default” is selected, the printer uses the AppleTalk zone that the
[list of zones available on the network]	router identifies as the default zone for the network. If no default zone exists,
	then the zone marked with an * is the default setting.

Standard USB menu

Menu item	Description
PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job received
On	through a USB port requires it, regardless of the default printer language
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PostScript emulation if the PS SmartSwitch is set to On. It uses the default
	printer language specified in the Setup menu if the PS SmartSwitch is set to
	Off.
PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job received
On	through a USB port requires it, regardless of the default printer language
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if the PCL SmartSwitch is set to Off.
NPA Mode	Sets the printer to perform the special processing required for bidirectional
Auto	communication following the conventions defined by the NPA protocol
On	Notes:
Off	• Auto is the factory default setting. Auto sets the printer to examine data,
	determine the format, and then process it appropriately.
	• Changing this setting from the printer control panel and then exiting the
	menus causes the printer to restart. The menu selection is then updated.