Lexmark C950 Understanding printer menus 117, USB Buffer, ENA Address, ENA Netmask, ENA Gateway

Understanding printer menus		117
	Menu item	Description
	USB Buffer	Sets the size of the USB input buffer
	Auto	Notes:
	3KB to [maximum size allowed]
		• Auto is the factory default setting.
	Disabled
		• Disabled turns off job buffering. Any jobs already buffered on the printer hard
		disk are printed before normal processing resumes.
		• The USB buffer size value can be changed in 1-KB increments.
		• The maximum size allowed depends on the amount of memory in the printer,
		the size of the other link buffers, and whether Resource Save is set to On or
		Off.
		• To increase the maximum size range for the USB Buffer, disable or reduce the
		size of the parallel, serial, and network buffers.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Job Buffering	Temporarily stores print jobs on the printer hard disk before printing
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	On
		• Auto is the factory default setting.
	Off
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Sets the network address information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Sets the netmask information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Sets the gateway information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.