Lexmark C950 manual Installing an Internal Solutions Port, Plastic pins, Metal pins

Additional printer setup 28

3Holding the card by its sides, align the plastic pins on the card with the holes on the system board.

2

1

1	Plastic pins
2	Metal pins

4Push the card firmly into place.

Notes:

•The entire length of the connector on the card must touch and be flush against the system board.

•Be careful not to damage the connectors.

Installing an Internal Solutions Port

The system board supports one optional Lexmark Internal Solutions Port (ISP).

Note: This task requires a flathead screwdriver.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.