Lexmark C950 manual Bin 2 booklet‑maker, Bin 1 finishing features, Bin 2 finishing features

Paper and specialty media guide 84

Bin 1 finishing features

Size	Punch*	Offset	Single/Double staple	Double dual staple
A3
A4
A5	X	X	X	X
Executive				X
Folio	X			X
JIS B4				X
JIS B5				X
Legal	X			X
Letter
Statement	X	X	X
Tabloid				X
Universal
Envelopes (any size)	X	X	X	X

*For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3‑hole punch and 10 in. (254 mm) for a 4‑hole punch.

Punch—Select from two‑, three‑, or four‑hole punch

Single staple—Use only one staple

Double staple—Use two staples

Double dual staple—Use two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and 12 in. (297 mm) with lengths between 7 in. (182 mm) and 17 in. (432 mm).

Bin 2 (booklet‑maker)

Bin 2 is available only when the booklet finisher is installed. The paper capacity of bin 2 (booklet‑maker) is 270 sheets or 18 sets of 15‑sheet booklets.

Bin 2 finishing features

Size	Bi fold	Booklet fold	Saddle staple
A3
A4 (only SEF)
A5	X	X	X

SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first. Bi fold—Each page is individually folded and stacked separately.

Booklet fold—A multiple-page job is folded along the center into a single booklet.

Saddle staple—A booklet‑fold print job is stapled along the center fold.