Lexmark C950 manual Bin Setup menu, Understanding printer menus 108

Understanding printer menus		108
	Menu item	Description
	Portrait Width	Sets the portrait width
	3–48 inches	Notes:
	76–1219 mm
		• 11.69 inches is the US factory default setting. Inches can be
		increased in 0.01‑inch increments.
		• 296.9 mm is the international factory default setting. Millimeters
		can be increased in 1‑mm increments.
		• If the width exceeds the maximum, then the printer uses the
		maximum width allowed.
	Portrait Height	Sets the portrait height
	3–48 inches	Notes:
	76–1219 mm
		• 48 inches is the US factory default setting. Inches can be increased in
		0.01‑inch increments.
		• 1219 mm is the international factory default setting. Millimeters can
		be increased in 1‑mm increments.
		• If the height exceeds the maximum, then the printer uses the
		maximum height allowed.
	Feed Direction	Specifies the feed direction
	Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only if the longest edge is shorter than the maximum width supported by the tray.

Bin Setup menu

Menu item	Description
Output Bin	Specifies the default exit bin
Standard Bin	Note: Standard Bin is the factory default setting.
Bin [x]
Configure Bins	Specifies configuration options for exit bins
Mailbox	Notes:
Link
	• Mailbox is the factory default setting. This setting
Link Optional
	treats each bin as a separate mailbox.
Type Assignment
	• Link configures all available bins as one large exit bin.
	• Link Optional links together all available exit bins
	except the standard bin and only appears when at
	least two optional bins are installed.
	• Type Assignment assigns each paper type to an
	output bin or linked bin set.
	• Bins assigned the same name are automatically
	linked unless Link Optional is selected.