Lexmark C950 manual Understanding printer menus 136

Understanding printer menus		136
	Menu item	Description
	Sides (Duplex)	Specifies whether prints are on one side or on both sides of the paper
	1 sided	Note: 1 sided is the factory default setting.
	2 sided
	Staple	Specifies whether prints are stapled
	Off	Notes:
	Auto
		• Off is the factory default setting.
	Back
		• This menu appears only when a stapler is installed.
	Dual
	Dual Double
	Front
	Hole Punch	Specifies whether prints have punched holes
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu appears only when a puncher is installed.
	Hole Punch Mode	Determines the type of punch finishing performed on prints
	2 holes	Notes:
	3 holes
		• “2 holes” is the factory default setting regardless of hardware.
	4 holes
		• “3 holes” and “4 holes” only appear when their respective hole punch
		hardware is installed.
		•
	Duplex Binding	Defines the way duplex pages are bound and how the printing on the back of the
	Long Edge	page is oriented in relation to the printing on the front of the page
	Short Edge	Notes:
		• Long Edge is the factory default setting. Long edge assumes binding along the
		long edge of the page (left edge for portrait and top edge for landscape).
		• Short edge assumes binding along the short edge of the page (top edge for
		portrait and left edge for landscape).
	Paper Saver Orientation	Specifies the orientation of a multiple‑page document
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	Paper Saver	Specifies that multiple‑page images be printed on one side of a paper
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up