Lexmark C950 manual Installing the printer on a wireless network Windows

Additional printer setup 45

Installing the printer on a wireless network (Windows)

Before installing the printer on a wireless network, make sure:

•Your wireless network is set up and is working properly.

•The computer you are using is connected to the same wireless network where you want to set up the printer.

1Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Note: Make sure the printer and the computer are fully on and ready.

Warning—Potential Damage: Do not connect the USB cable until instructed to do so on the computer screen.

2Obtain a copy of the software installer package.

•From the Software and Documentation CD that came with your printer.

•From our Web site:

Go to http://support.lexmark.com, and then navigate to:

SUPPORT & DOWNLOAD > select your printer > select your operating system

3Double‑click the software installer package. Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

aClick or click Start, and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe.

cPress Enter or click OK.