ASSEMBLY
10INSTALLING BAGGER MOUNT
3 Bin Collector
1.Remove the four carriage bolts indicated from the rear guard.
Remove
2. Install the bagger mount tube from the mount kit.
Nut
Mount Tube
Hex Bolt
3.Remove the front carriage bolts securing the top mount straps to the frame.
4.Install kit mount straps between the mount tube and frame as shown in the illustration. The front side of the kit mount straps should be on the inside of the mower frame.
NOTE: Models with vertically mounted muffl er will not use the right mount strap.
3. Tighten all hardware.
Hex Bolts | Flat Washers |
|
Nut
Kit Mount
Strap
Kit Mount Strap
Vertical Mount Mufflers
Nut
Hex Bolt
Flat Washers
Hex Bolt
Exhaust Guard
1.Install exhaust guard to right side of mount as shown.
2.Secure with hex bolts, washers and hex nuts. NOTE: Models with vertically mounted muffl er will not use the right mount strap.
12