Husqvarna O0803001 manual Customer Responsibilities, General Recommendations

Page 16

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS

Always observe safety rules when performing any maintenance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your mower operator’s manual.

CAUTION

BEFORE PERFORMING MAINTENANCE, SERVICE OR ADJUSTMENTS:

Set parking brake.

Place motion control levers in “NEUTRAL” position.

Place clutch control in “DISENGAGED” position.

Turn ignition key to “OFF” position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

STORAGE

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and before storing. Failure to do so may result in spon- taneous combustion which could develop into a fire.

CAUTION

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recommended parts, when necessary.

17

Image 16
Contents Operators Manual Table of Contents Safety Rules Safe Operation Practices for RIDE-ON MowersIII. Children Do notYour Safety is Involved Unpacking Instructions Container ContentsTools Required 1INSTALLING Drive Pulley Assembly2TRIMMING Blower 3MOUNTING Blower Assembly 4INSTALLING Drive Belt Installing Belt Covers 8INSTALLING Middle Chute Trimming Middle Chute10INSTALLING Bagger Mount Vertical Mount Mufflers11INSTALLING Chute Support 12INSTALLING Weight Kits 13MOUNTING Cover Assembly To Support Assembly BAG System 14MOUNTING Cover Assembly To Support Assembly BAG SystemOperation Tips for Improved BaggingCustomer Responsibilities General RecommendationsParts BAG Assembly 539 Parts NUT, #10-24, Crownlock Torque to 30 LBs 3017 2122 Traction Spring Parts SHIELD, Belt Weight KIT 42/48 3 BIN Weight KIT 42/48 2 BINWeight KIT 52 3 BIN 539 130330 R3 01/22/08