ASSEMBLY
1INSTALLING DRIVE PULLEY
1.Remove the discharge chute from the deck. (Deck confi guration will vary by size and model)
2.Lower deck to the lowest cutting position.
3.Remove the right hand (discharge side) belt cover from the deck.
4.Relieve the tension from the deck belt and re- move from the center deck pulley.
(See Operator’s Manual if necessary)
2TRIMMING BLOWER
(52" and 61" decks only)
1.Place blower assembly on secure table or stable surface.
2.Remove the bolts securing the rear mount bracket.
3.Using the hacksaw, trim the blower housing along the recessed grooves.
4.Reinstall the rear mount bracket with previously removed bolts.
Deck Height Adjustment
Tension Release Lever
Belt Cover
Mount Bracket Rear
52/61 Trim Line
Discharge Chute
5.Remove the nut that secures the right hand deck pulley to the spindle.
6.Install drive pulley included
in collection system kit on top of the current deck pulley.
Drive Pulley
7.Reinstall the nut on the spindle and torque to
8.Reinstall the deck belt.
8