MANTEL INSTALLATION CONTINUED
5.Center the unit on the Hearth Base. Run the Gas Line into the firebox. You can access beneath the firebox, to connect gas supply to control valve, from the left or right of the
unit. Knock out the appropriate holes and run the flexible gas line into the fireplace and connect to the flexible gas line supplied with the fireplace.
6.If installing Optional VF32B Blower Kit, use a standard
NOTE: See Blower Kit Instruction sheet for full installation instructions.
Knock out plug in cabinet and run Flexible Gas Line into firebox.
Figure 12 - Installing Firebox on Hearth Base
7.Place the Cabinet Mantel Legs on Hearth Base and slide each side firmly up against the unit (See Figure 13). NOTE: The Cabinet Mantel Legs and Hearth Base should be against the wall.
8.Lower the header into the slots at
the top of each leg, using four | Header |
| |
to the legs. |
|
Wood
Screws
Right
Leg
Figure 13 - Installing Cabinet Mantel Legs & Header
17