Husqvarna 111750 / HCS1372 manual Operation

Page 6

SAFETY RULES

3 - Operation

Never run an engine in an enclosed area.

Only operate in good light, keeping away from holes and hidden hazards.

Slow down and use extra care on hillsides. Make turns gradually and at slow speed. Do not operate across the sides of slopes. Operate up and down slopes only. Do not operate on steep slopes.

Turf conditions can affect the machine’s stability. Do not operate on wet grass where traction may be reduced.

Do not change the engine governor setting or overspeed the engine.

Stop equipment and inspect vacuum impeller and hoses after striking objects or if an abnormal vibration occurs. Make necessary repairs before resuming operations.

Look behind and down before backing up to ensure a clear path.

Slow down and use caution when making turns and crossing roads and sidewalks. Stop vacuum and mower blades if not mowing.

Do not operate machine under the influence of alcohol or drugs.

Use care when loading or unloading the machine into a trailer or truck.

Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

4 - Maintenance and Storage:

Stop engine and disconnect spark plug wire. Wait for all movement to stop before adjusting, cleaning, or repairing.

Clean grass and debris from muffler and engine to help prevent fires. Clean up oil or fuel spillage.

Let engine cool before storing and do not store near sparks or open flame.

Shut off fuel while storing. Do not store fuel near flames or drain indoors.

Never allow untrained personnel to service machine.

Keep hands and feet away from moving parts. If possible, do not make adjustments with the engine running.

Keep all parts in good working condition and all hardware tightened. Replace all worn or damaged decals.

6

Image 6
Contents Page Husqvarna. All Rights Reserved Index Operators GuideFeatures & Controls Safety Rules General InformationOperation Assembly Unpacking InstructionsRear Guard Strap Hitch Assembly Lanyard Hitch PIN Latch Hood Assembly Rubber Seal Hood Hinge Nyloc NUT Hood Assembly Draw Latch Mount Tabs Draw Latch Keeper Blower/Drive Kit Operation Operating the Collection SystemPreventative Maintenance Schedule Service and MaintenanceCleaning and Washing TransportCleaning Poly Mesh Caring For HosesTroubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly Hitch Assembly Blower Assembly Blower Assembly Weight KIT Mounting KIT BAG Assembly Drive KIT Assembly Weight BAR, Front Parts DescriptionNUT, 1/2-13, Whizlock LOCKWASHER, 7/16 Page Page