ASSEMBLY
Unpacking Instructions
1.Cut plastic tie securing the hitch to the crate top.
2.Remove the top of the crate.
3.Remove the plastic bag.
4.Remove the hose.
5.Remove the sides and ends of the crate.
6.Remove the mounting kit and drive kit boxs from the corner of the crate.
7.Cut the two plastic ties that secure the hitch assembly to the pallet. Remove the hitch assembly.
8.Cut the two plastic ties that secure the back of the hood, and the two that secure the front of the hood. Remove the hood assembly.
9.Cut and two plastic ties that secure the weight bar to the pallet. Remove the weight bar.
10.Cut the two plastic ties that secure the blower assembly to the pallet. Remove the blower assembly.
11.Remove the 1 x 4 that secures the cast weights to the pallet. Remove the weights.
Assembly Instructions
Collection System
Tools Required:
Ratchet | 9/16" Socket |
Torque Wrench | 5/8" Socket |
1/2" Wrench | (2) 3/4" Wrench |
1/2" Socket | 3/4" Socket |
9/16" Wrench | Flat Screw Driver |
1.Open the mounting kit box and remove all of the components.
2.Place the support bracket on the frame and secure with (2) 990563, 3/8 x 1 bolts and (2) 976979, 3/8 nyloc nuts. Figure 1.
3.Place the hitch brackets on the frame and secure with (3) 990622, 1/2 x 1 1/4 bolts and
(3) 101331, 1/2 nyloc nuts. Figure 1.
1 |
2 |
FIGURE 1
1.SUPPORT BRACKET
2.HITCH BRACKET
7