Husqvarna 111750 / HCS1372 manual Hood Assembly Rubber Seal Hood Hinge Nyloc NUT

Page 9

ASSEMBLY

7.Place the hood assembly on to the hitch 8. Open the hood and secure the (2) springs

assembly. Place both hood hinges between	to the bolts on the hood assembly and the
the upper hitch mounts on the hitch assembly.	hitch assembly. Figure 4.
Be sure that the rubber seal is on the inside
of the hood. Place the (2) friction washers
between the hood hinge and the upper hitch
mount. Place (2)990563, 3/8 x 1 bolt thru the
hinge and mount. Secure with (2) 976979,
3/8 nyloc nut. Figure 4.

1
	2
	3
	4
	6
5	7
5
	8

FIGURE 4

1.	HOOD ASSEMBLY	5.	RUBBER SEAL
2.	HOOD HINGE	6.	3/8 NYLOC NUT
3.	3/8 X 1 BOLT	7.	UPPER HITCH MOUNT
4.	SPRING	8.	HITCH PIN

9

Image 9

Contents Page Husqvarna. All Rights Reserved Operators Guide IndexFeatures & Controls General Information Safety RulesOperation Unpacking Instructions AssemblyRear Guard Strap Hitch Assembly Lanyard Hitch PIN Latch Hood Assembly Rubber Seal Hood Hinge Nyloc NUT Hood Assembly Draw Latch Mount Tabs Draw Latch Keeper Blower/Drive Kit Operating the Collection System OperationCleaning and Washing Service and MaintenancePreventative Maintenance Schedule TransportCaring For Hoses Cleaning Poly MeshTroubleshooting Guide Spindle Drive Assembly Parts Illustrations Hood Assembly Hitch Assembly Blower Assembly Blower Assembly Weight KIT Mounting KIT BAG Assembly Drive KIT Assembly Parts Description Weight BAR, FrontNUT, 1/2-13, Whizlock LOCKWASHER, 7/16 Page Page